B
u
r
r
Ć
B
r
o
w
n
P
r
o
d
u
c
t
s
f
r
o
m
T
e
x
a
s
I
n
s
t
r
u
m
e
n
t
s
OPA890
SBOS369–MAY 2007
Low-Power, Wideband, Voltage-Feedback
OPERATIONAL AMPLIFIER with Disable
FEATURES
DESCRIPTION
•
FLEXIBLE SUPPLY RANGE:
+3V to +12V Single Supply
±1.5V to ±6V Dual Supplies
The OPA890 represents a major step forward in
unity-gain stable, voltage-feedback op amps. A new
internal architecture provides slew rate and
full-power bandwidth previously found only in
wideband, current-feedback op amps. These
capabilities provide exceptional full power bandwidth.
Using a single +5V supply, the OPA890 can deliver a
1V to 4V output swing with over 35mA drive current
and 220MHz bandwidth. This combination of
features makes the OPA890 an ideal RGB line driver
or single-supply analog-to-digital converter (ADC)
input driver.
•
•
UNITY-GAIN STABLE
WIDEBAND +5V OPERATION: 115MHz
(G = +2V/V)
•
•
•
•
OUTPUT VOLTAGE SWING: ±4V
HIGH SLEW RATE: 500V/µs
LOW QUIESCENT CURRENT: 1.1mA
LOW DISABLE CURRENT: 30µA
APPLICATIONS
The low 1.1mA supply current of the OPA890 is
precisely trimmed at +25°C. This trim, along with low
temperature drift, ensures lower maximum supply
current than competing products. System power may
be reduced further using the optional disable control
pin. Leaving this disable pin open, or holding it
HIGH, operates the OPA890 normally. If pulled
LOW, the OPA890 supply current drops to less than
30µA while the output goes into a high-impedance
state.
•
•
•
•
•
•
•
VIDEO LINE DRIVING
xDSL LINE DRIVERS/RECEIVERS
HIGH-SPEED IMAGING CHANNELS
ADC BUFFERS
PORTABLE INSTRUMENTS
TRANSIMPEDANCE AMPLIFIERS
ACTIVE FILTERS
RELATED
OPERATIONAL AMPLIFIER
PRODUCTS
Multiplying DAC Transimpedance Amplifier
+5V
DESCRIPTION
SINGLES
DUALS
TRIPLES
Low-Power Voltage-Feedback
with Disable
—
OPA2890
—
VDD
GND
VREF
Voltage-Feedback Amplifier
with Disable (1800V/µs)
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
DB8
DB9
DB10
DB11
OPA690
OPA2690
OPA3690
-5V
Current-Feedback Amplifier
with Disable (2100V/µs)
½
OPA691
OPA692
OPA2691
—
OPA3691
OPA3692
R1
DAC7822
RFB
Fixed Gain
+7.5V
OPA890
-2.5V
2.5pF
IOUT1
IOUT2
VOUT
R2
R2_3
R3
0V £ VOUT £ 5V
5.56kW
0.1mF
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007, Texas Instruments Incorporated