5秒后页面跳转
捷配首页

Datasheet > 放大器电路 > 运算放大器> OPA836IDBVR
OPA836IDBVR PDF预览

OPA836IDBVR

更新时间： 2024-11-23 10:22:07
品牌 Logo 应用领域
德州仪器 - TI 运算放大器
页数 文件大小 规格书
49页 1764K
描述
Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp

阅读下载

中文翻译

获取价格

OPA836IDBVR 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Active零件包装代码：SOT-23
包装说明：SOT-23, 6 PIN针数：6
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8542.33.00.01Factory Lead Time：6 weeks
风险等级：1.14放大器类型：OPERATIONAL AMPLIFIER
架构：VOLTAGE-FEEDBACK最大平均偏置电流 (IIB)：1.8 µA
25C 时的最大偏置电流 (IIB)：1 µA最小共模抑制比：94 dB
标称共模抑制比：114 dB频率补偿：YES
最大输入失调电流 (IIO)：0.18 µA最大输入失调电压：1060 µV
JESD-30 代码：R-PDSO-G6JESD-609代码：e3
长度：2.9 mm低-偏置：NO
低-失调：NO微功率：NO
湿度敏感等级：1功能数量：1
端子数量：6最高工作温度：125 °C
最低工作温度：-40 °C封装主体材料：PLASTIC/EPOXY
封装代码：LSSOP封装等效代码：TSOP6,.11,37
封装形状：RECTANGULAR封装形式：SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
包装方法：TR峰值回流温度（摄氏度）：260
功率：NO电源：+-1.25/+-2.75/2.5/5.5 V
可编程功率：NO认证状态：Not Qualified
座面最大高度：1.45 mm标称压摆率：260 V/us
子类别：Operational Amplifier最大压摆率：1.2 mA
供电电压上限：5.5 V标称供电电压 (Vsup)：2.7 V
表面贴装：YES技术：BIPOLAR
温度等级：AUTOMOTIVE端子面层：Matte Tin (Sn)
端子形式：GULL WING端子节距：0.95 mm
端子位置：DUAL处于峰值回流温度下的最长时间：NOT SPECIFIED
标称均一增益带宽：110000 kHz最小电压增益：100000
宽带：YES宽度：1.6 mm
Base Number Matches：1

OPA836IDBVR 数据手册

 浏览型号OPA836IDBVR的Datasheet PDF文件第2页浏览型号OPA836IDBVR的Datasheet PDF文件第3页浏览型号OPA836IDBVR的Datasheet PDF文件第4页浏览型号OPA836IDBVR的Datasheet PDF文件第5页浏览型号OPA836IDBVR的Datasheet PDF文件第6页浏览型号OPA836IDBVR的Datasheet PDF文件第7页 
OPA836  
OPA2836  
www.ti.com  
SLOS712D –JANUARY 2011–REVISED OCTOBER 2011  
Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp  
Check for Samples: OPA836, OPA2836  
1
FEATURES  
DESCRIPTION  
Fabricated using the industry-leading BiCom-3x  
(SiGe complimentary bipolar) process, the OPA836  
and OPA2836 are single and dual ultra low-power,  
rail-to-rail output, negative rail input, voltage-feedback  
operational amplifiers designed to operate over a  
power supply range of 2.5 V to 5.5 V Single Supply  
and ±1.25 V to ±2.75 V dual supply. Consuming only  
1 mA per channel and a unity gain bandwidth of 205  
MHz, these amplifiers set an industry leading  
power-to-performance ratio for rail-to-rail amplifiers.  
•
Low Power  
–
–
–
Supply Voltage: 2.5 V to 5.5 V  
Quiescent Current: 1 mA (Typ)  
Power Down Mode: 0.5µA Ttyp)  
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Bandwidth: 205 MHz  
Slew Rate: 560 V/µs  
Rise Time: 3 ns (2 VSTEP  
)
Settling Time: 22 ns (2 VSTEP  
)
For battery powered portable applications where  
power is of key importance, the OPA836's and  
OPA2836's low power consumption and high  
frequency performance offers designers performance  
versus power not attainable in other devices. Coupled  
with a power savings mode to reduce current to <1.5  
μA, the device offers an attractive solution for high  
frequency amplifiers in battery powered applications.  
Overdrive Recovery Time: 60ns  
SNR: 0.00013% (–117.6 dBc) at 1 kHz (1 VRMS  
)
THD: 0.00003% (–130 dBc) at 1 kHz (1 VRMS  
)
HD2/HD3: –85dBc / -105 dBc at 1 MHz (2 Vpp)  
Input Voltage Noise: 4.6 nV/rtHz (f = 100 kHz)  
Input Offset Voltage: 65 µV (400 µV Max)  
CMRR: 116 dB  
The OPA836 and OPA2836 are offered in following  
package options:  
Output Current Drive: 50 mA  
RRO – Rail-to-Rail Output  
•
OPA836 Single: SOT23-6 (DBV), and 10 pin  
WQFN (RUN) with integrated gain resistors.  
Input Voltage Range: -0.2 V to 3.9 V  
(5 V Supply)  
•
OPA2836 Dual: SOIC-8 (D), VSSOP (MSOP) -10  
(DGS), and 10 pin WQFN (RUN).  
•
Operating Temperature Range:  
-40°C to +125°C  
The OPA836 RUN package option includes  
integrated gain setting resistors for smallest possible  
footprint on a printed circuit board (≈ 2mm x 2mm).  
By adding circuit traces on the PCB, gains of +1, -1,  
-1.33, +2, +2.33, -3, +4, -4, +5, -5.33, +6.33, -7, +8  
and inverting attenuations of -0.1429, -0.1875, -0.25,  
-0.33, -0.75 can be achieved. See the Application  
Information section for details.  
APPLICATIONS  
•
•
•
•
•
•
Low Power Signal Conditioning  
Audio ADC Input Buffer  
Low Power SAR and ΔΣ ADC Driver  
Portable Systems  
The devices are characterized for operation over the  
extended industrial temperature range –40°C to  
125°C.  
Low Power Systems  
High Density Systems  
0
2.7V  
OPA836 Related Products  
VSIG  
VSIG  
-20  
2.7V  
VS+  
0V  
1.35V  
100  
2.2nF  
2k  
2k  
DESCRIPTION  
SINGLES  
DUALS  
OPA2830  
OPA2835  
TRIPLES  
QUADS  
OPA4830  
—
5V  
2.5V  
REF  
1k  
VIN  
-40  
-60  
VDD  
OPA836  
VS-  
+In  
Rail-to-Rail  
—
—
—
ADS8326  
-In  
Rail-to-Rail, Low  
Power  
OPA835  
1k  
1k  
-80  
Rail-to-Rail, Fixed  
Gain  
OPA832  
OPA690  
OPA820  
OPA2832 OPA3832  
OPA2690 OPA3690  
—
—
-100  
-120  
-140  
General-Purpose, High  
Slew Rate  
Low-Noise, DC  
Precision  
OPA2822  
—
OPA4820  
0
20,000  
40,000  
60,000  
80,000  
100,000  
120,000  
Frequency (Hz)  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2011, Texas Instruments Incorporated  
 
 
1234567...49

中文翻译

下载PDF

OPA836IDBVR 替代型号

型号 品牌 替代类型 描述 数据表
OPA836IDBVT TI

完全替代

 Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA835IDBVR TI

类似代替

 Ultra Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA835IDBVT TI

类似代替

 Ultra Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp

与OPA836IDBVR相关器件

型号 品牌 获取价格 描述 数据表
OPA836IDBVT TI

获取价格

 		Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA836IRUNR TI

获取价格

 		Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA836IRUNT TI

获取价格

 		Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA837 TI

获取价格

 		低功耗、精密、105MHz 电压反馈运算放大器
OPA837IDBVR TI

获取价格

 		低功耗、精密、105MHz 电压反馈运算放大器 | DBV | 6 | -40 to 12
OPA837IDBVT TI

获取价格

 		低功耗、精密、105MHz 电压反馈运算放大器 | DBV | 6 | -40 to 12
OPA837IDCKR TI

获取价格

 		低功耗、精密、105MHz 电压反馈运算放大器 | DCK | 5 | -40 to 12
OPA837IDCKT TI

获取价格

 		低功耗、精密、105MHz 电压反馈运算放大器 | DCK | 5 | -40 to 12
OPA838 TI

获取价格

 		1mA、300MHz 增益带宽、电压反馈运算放大器
OPA838IDBVR TI

获取价格

 		1mA、300MHz 增益带宽、电压反馈运算放大器 | DBV | 6 | -40 to

与OPA836IDBVR相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证