5秒后页面跳转
OPA835IRUNT PDF预览

OPA835IRUNT

更新时间: 2024-09-30 10:22:07
品牌 Logo 应用领域
德州仪器 - TI 运算放大器
页数 文件大小 规格书
43页 1353K
描述
Ultra Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp

OPA835IRUNT 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:QFN
包装说明:VQCCN, LCC10,.08SQ,20针数:10
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.33.00.01Factory Lead Time:1 week
风险等级:1.75放大器类型:OPERATIONAL AMPLIFIER
架构:VOLTAGE-FEEDBACK最大平均偏置电流 (IIB):0.53 µA
25C 时的最大偏置电流 (IIB):0.4 µA最小共模抑制比:91 dB
标称共模抑制比:110 dB频率补偿:YES
最大输入失调电流 (IIO):0.1 µA最大输入失调电压:1850 µV
JESD-30 代码:S-PQCC-N10JESD-609代码:e4
长度:2 mm低-偏置:NO
低-失调:NO微功率:YES
湿度敏感等级:2功能数量:1
端子数量:10最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:VQCCN封装等效代码:LCC10,.08SQ,20
封装形状:SQUARE封装形式:CHIP CARRIER, VERY THIN PROFILE
包装方法:TR峰值回流温度(摄氏度):260
功率:NO电源:+-1.25/+-2.75/2.5/5.5 V
可编程功率:NO认证状态:Not Qualified
座面最大高度:0.8 mm标称压摆率:110 V/us
子类别:Operational Amplifier最大压摆率:0.35 mA
供电电压上限:5.5 V标称供电电压 (Vsup):2.7 V
表面贴装:YES技术:BIPOLAR
温度等级:AUTOMOTIVE端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:NO LEAD端子节距:0.5 mm
端子位置:QUAD处于峰值回流温度下的最长时间:NOT SPECIFIED
标称均一增益带宽:30000 kHz最小电压增益:100000
宽带:NO宽度:2 mm
Base Number Matches:1

OPA835IRUNT 数据手册

 浏览型号OPA835IRUNT的Datasheet PDF文件第2页浏览型号OPA835IRUNT的Datasheet PDF文件第3页浏览型号OPA835IRUNT的Datasheet PDF文件第4页浏览型号OPA835IRUNT的Datasheet PDF文件第5页浏览型号OPA835IRUNT的Datasheet PDF文件第6页浏览型号OPA835IRUNT的Datasheet PDF文件第7页 
OPA835, OPA2835  
www.ti.com  
SLOS713B JANUARY 2011REVISED MAY 2011  
Ultra Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp  
Check for Samples: OPA835, OPA2835  
1
FEATURES  
DESCRIPTION  
Fabricated using the industry-leading BiCom-3x  
Ultra Low Power  
(SiGe complimentary bipolar) process, the OPA835  
and OPA2835 are single and dual ultra low-power,  
rail-to-rail output, negative rail input, voltage-feedback  
operational amplifiers designed to operate over a  
power supply range of 2.5V to 5.5V Single Supply  
and ±1.25V to ±2.75V dual supply. Consuming only  
250µA per channel and a unity gain bandwidth of  
56MHz, these amplifiers set an industry leading  
power-to-performance ratio for rail-to-rail amplifiers.  
Supply Voltage: 2.5V to 5.5V  
Quiescent Current: 250µA (typ)  
Power Down Mode: 0.5µA (typ)  
Bandwidth: 56 MHz  
Slew Rate: 160 V/µs  
Rise Time: 10ns (2VSTEP  
)
Settling Time: 45ns (2VSTEP  
)
For battery powered portable applications where  
power is of key importance, the OPA835's and  
OPA2835's low power consumption and high  
frequency performance offers designers performance  
versus power not attainable in other devices. Coupled  
with a power savings mode to reduce current to  
<1.5μA, the device offers a very attractive solution for  
high frequency amplifiers in battery powered  
applications.  
Overdrive Recovery Time: 195ns  
SNR: 0.00015% (116.4dBc) at 1 kHz (1VRMS  
)
THD: 0.00003% (130dBc) at 1 kHz (1VRMS  
)
HD2/HD3: 70dBc/73dBc at 1 MHz (2Vpp)  
Input Voltage Noise: 9.3nV/rtHz (f=100 kHz)  
Input Offset Voltage: 100 µV (500 µV max)  
CMRR: 113dB  
Output Current Drive: 40mA  
RRO Rail-to-Rail Output  
The OPA835 and OPA2835 are offered in following  
package options:  
OPA835 Single: SOT23-6 (DBV), and 10 pin RUN  
with integrated gain resistors.  
Input Voltage Range: 0.2V to 3.9V (5V supply)  
Operating Temperature Range: 40°C125°C  
OPA2835 Dual: SOIC-8 (D), MSOP-10 (DGS),  
and 10 pin RUN.  
APPLICATIONS  
The devices are characterized for operation over the  
extended industrial temperature range 40°C to  
125°C.  
Low Power Signal Conditioning  
Audio ADC Input Buffer  
Low Power SAR and ΔΣ ADC Driver  
Portable Systems  
OPA835 Related Products  
DESCRIPTION  
SINGLES  
DUALS  
OPA2830  
OPA2836  
TRIPLES  
QUADS  
OPA4830  
Low Power Systems  
Rail-to-Rail  
High Density Systems  
Rail-to-Rail, Low  
Power  
OPA836  
Ultrasonic Flow Meter  
Rail-to-Rail, Fixed  
Gain  
OPA832  
OPA690  
OPA820  
OPA2832 OPA3832  
OPA2690 OPA3690  
0
2.7V  
VSIG  
VSIG  
General-Purpose, High  
Slew Rate  
-20  
2.7V  
VS+  
0V  
1.35V  
100  
2.2nF  
4.02k  
4.02k  
5V  
2.5V  
REF  
2k  
VIN  
-40  
-60  
VDD  
OPA835  
VS-  
+In  
Low-Noise, DC  
Precision  
OPA2822  
OPA4820  
ADS8326  
-In  
2k  
2k  
-80  
-100  
-120  
-140  
0
20,000  
40,000  
60,000  
80,000  
100,000  
120,000  
Frequency (Hz)  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
UNLESS OTHERWISE NOTED this document contains  
PRODUCTION DATA information current as of publication date.  
Products conform to specifications per the terms of Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2011, Texas Instruments Incorporated  
 

OPA835IRUNT 替代型号

型号 品牌 替代类型 描述 数据表
OPA835IRUNR TI

类似代替

Ultra Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA836IRUNR TI

类似代替

Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA835IDBVT TI

功能相似

Ultra Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp

与OPA835IRUNT相关器件

型号 品牌 获取价格 描述 数据表
OPA836 TI

获取价格

Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA836_14 TI

获取价格

Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA836_16 TI

获取价格

Operational Amplifiers
OPA836IDBVR TI

获取价格

Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA836IDBVT TI

获取价格

Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA836IRUNR TI

获取价格

Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA836IRUNT TI

获取价格

Very Low-Power, Rail-to-Rail Out, Negative Rail In, VFB Op Amp
OPA837 TI

获取价格

低功耗、精密、105MHz 电压反馈运算放大器
OPA837IDBVR TI

获取价格

低功耗、精密、105MHz 电压反馈运算放大器 | DBV | 6 | -40 to 12
OPA837IDBVT TI

获取价格

低功耗、精密、105MHz 电压反馈运算放大器 | DBV | 6 | -40 to 12