OPA830
SBOS263B − AUGUST 2004 − REVISED JANUARY 2005
Low-Power, Single-Supply, Wideband
Operational Amplifier
FD EATURES
HIGH BANDWIDTH:
250MHz (G = +1)
110MHz (G = +2)
DESCRIPTION
The OPA830 is a low-power, single-supply, wideband,
voltage-feedback amplifier designed to operate on a single
+3V or +5V supply. Operation on 5V or +10V supplies is also
supported. The input range extends below the negative
supply and to within 1.7V of the positive supply. Using
complementary common-emitter outputs provides an output
swing to within 25mV of either supply while driving 150Ω. High
output drive current ( 80mA) and low differential gain and
phase errors also make them ideal for single-supply
consumer video products.
D
LOW SUPPLY CURRENT: 3.9mA (V = +5V)
FLEXIBLE SUPPLY RANGE:
1.4V to 5.5V Dual Supply
S
D
+2.8V to +11V Single Supply
INPUT RANGE INCLUDES GROUND ON
SINGLE SUPPLY
D
D
D
D
D
4.88V OUTPUT SWING ON +5V SUPPLY
HIGH SLEW RATE: 550V/ns
LOW INPUT VOLTAGE NOISE: 9.2nV/√Hz
Pb-FREE SOT23 PACKAGE
Low distortion operation is ensured by the high gain
bandwidth product (110MHz) and slew rate (550V/µs), making
the OPA830 an ideal input buffer stage to 3V and 5V CMOS
ADCs. Unlike other low-power, single-supply amplifiers,
distortion performance improves as the signal swing is
decreased. A low 9.2nV/√Hz input voltage noise supports
wide dynamic range operation.
AD PPLICATIONS
D
D
D
D
D
SINGLE-SUPPLY ANALOG-TO-DIGITAL
CONVERTER (ADC) INPUT BUFFERS
SINGLE-SUPPLY VIDEO LINE DRIVERS
CCD IMAGING CHANNELS
LOW-POWER ULTRASOUND
PLL INTEGRATORS
The OPA830 is available in an industry-standard SO-8
package. The OPA830 is also available in an ultra-small
SOT23-5 package. For fixed-gain line driver applications,
consider the OPA832.
RELATED PRODUCTS
PORTABLE CONSUMER ELECTRONICS
DESCRIPTION
SINGLES
DUALS
TRIPLES
QUADS
Rail-to-Rail
—
OPA2830
—
OPA4830
—
+3V
Rail-to-Rail Fixed Gain
General-Purpose
(1800V/µs slew rate)
Low-Noise,
High DC Precision
OPA832
OPA2832 OPA3832
Ω
2.26k
+3V
OPA690
OPA820
OPA2690 OPA3690
—
374Ω
OPA2822
—
OPA4820
VIN
Ω
100
THS1040
10−Bit
OPA830
30MSPS
22pF
562Ω
750Ω
DC-Coupled, +3V ADC Driver
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
ꢀꢁ ꢂ ꢃꢄ ꢅ ꢆꢇ ꢂꢈ ꢃ ꢉꢆꢉ ꢊꢋ ꢌꢍ ꢎ ꢏꢐ ꢑꢊꢍꢋ ꢊꢒ ꢓꢔ ꢎ ꢎ ꢕꢋꢑ ꢐꢒ ꢍꢌ ꢖꢔꢗ ꢘꢊꢓ ꢐꢑꢊ ꢍꢋ ꢙꢐ ꢑꢕꢚ ꢀꢎ ꢍꢙꢔ ꢓꢑꢒ
ꢓ ꢍꢋ ꢌꢍꢎ ꢏ ꢑꢍ ꢒ ꢖꢕ ꢓ ꢊ ꢌꢊ ꢓ ꢐ ꢑꢊ ꢍꢋꢒ ꢖ ꢕꢎ ꢑꢛꢕ ꢑꢕ ꢎ ꢏꢒ ꢍꢌ ꢆꢕꢜ ꢐꢒ ꢇꢋꢒ ꢑꢎ ꢔꢏ ꢕꢋꢑ ꢒ ꢒꢑ ꢐꢋꢙ ꢐꢎ ꢙ ꢝ ꢐꢎ ꢎ ꢐ ꢋꢑꢞꢚ
ꢀꢎ ꢍ ꢙꢔꢓ ꢑ ꢊꢍ ꢋ ꢖꢎ ꢍ ꢓ ꢕ ꢒ ꢒ ꢊꢋ ꢟ ꢙꢍ ꢕ ꢒ ꢋꢍꢑ ꢋꢕ ꢓꢕ ꢒꢒ ꢐꢎ ꢊꢘ ꢞ ꢊꢋꢓ ꢘꢔꢙ ꢕ ꢑꢕ ꢒꢑꢊ ꢋꢟ ꢍꢌ ꢐꢘ ꢘ ꢖꢐ ꢎ ꢐꢏ ꢕꢑꢕ ꢎ ꢒꢚ
Copyright 2004−2005, Texas Instruments Incorporated
www.ti.com