OPA622
®
OPA622
OPA622
Wide-Bandwidth
OPERATIONAL AMPLIFIER
FEATURES
APPLICATIONS
● LARGE SIGNAL BANDWIDTH:
150MHz (AP), 200MHz (AU)
(Voltage-Feedback)
● BROADCAST/HDTV EQUIPMENT
● COMMUNICATIONS
● PULSE/RF AMPLIFIERS
● ACTIVE FILTER
● HIGH OUTPUT CURRENT: ±70mA
● SLEW RATE: 1500V/µs (AP), 1700V/µs (AU)
● DIFFERENTIAL GAIN: 0.15%
● HIGH SPEED ANALOG SIGNAL
PROCESSING
● DIFFERENTIAL PHASE: 0.08°
● MULTIPLIER OUTPUT AMP
● EXCELLENT BANDWIDTH/SUPPLY
● DIFFERENTIATOR FOR DIGITIZED
CURRENT RATIO: 200MHz/5mA
VIDEO SIGNALS
● LOW INPUT BIAS CURRENT: –1.2µA
The feedback buffer stage provides 700MHz band-
width, a very high slew rate, and a very short signal
delay time. It is designed primarily for interstage
buffering and not for driving long cables. When com-
bined with the current-feedback amplifier section, the
OPA622 can be interconnected as a voltage-feedback
amplifier with two identical high-impedance inputs.
In this configuration, it features a low common-mode
gain, low input offset, and, due to the delay time of the
additional feedback buffer, a decrease in frequency
bandwidth compared with the current-feedback
configuration. Unlike “classical” operational amplifi-
ers, the OPA622 achieves a nearly constant bandwidth
over a wide gain and output voltage range. The
external setting of the open-loop gain with ROG avoids
a large compensation capacitor, improves the slew
rate, and allows a frequency response adaption to
various gains and load conditions.
DESCRIPTION
The OPA622 is a monolithic amplifier component
designed for precision wide-bandwidth systems
including high-resolution video, RF and IF circuitry,
and communications equipment. It includes a mono-
lithic integrated current-feedback operational
amplifier block and a voltage buffer block, which,
when combined, form a voltage-feedback operational
amplifier.
When combined as a current-feedback amplifier, it
provides a 280MHz large-signal bandwidth at ±2.5V
output level and a 1700V/µs slew rate. The output
buffer stage can deliver ±70mA output current. The
high output current capability allows the OPA622 to
drive two 50Ω or 75Ω lines with ±3V output swing,
making it ideal along with the low differential
gain/phase errors for RF, IF, and video applications.
CURRENT-FEEDBACK
R2
VOLTAGE-FEEDBACK
R2
R1
COTA
10
R1
COTA
10
3
13
50Ω
–In
50Ω
BUF+
9
9
OPA622
OPA622
RIN
RIN
VFA
VOUT
CFA
8
VOUT
4
+In
4
+In
VIN
3
VIN
BUF–
13
2
2
50Ω
BUF+
ROG
50Ω
100Ω
IQ
Adjust
IQ
Adjust
RQ
RQ
–5V
–5V
International Airport Industrial Park
Tel: (520) 746-1111
•
Mailing Address: PO Box 11400
Cable: BBRCORP
•
Tucson, AZ 85734
•
Street Address: 6730 S. Tucson Blvd.
• Tucson, AZ 85706
•
Twx: 910-952-1111
•
•
Telex: 066-6491
•
FAX: (520) 889-1510
•
Immediate Product Info: (800) 548-6132
© 1991 Burr-Brown Corporation
PDS-1131E
Printed in U.S.A. March, 1995