OPA607, OPA2607
SBOS981J – OCTOBER 2019O– PREAV6IS0E7D, OAPPRAIL22600271
www.ti.com
SBOS981J – OCTOBER 2019 – REVISED APRIL 2021
OPAx607 50-MHz, Low-Power, Rail-to-Rail Output CMOS Operational Amplifier for
Cost Sensitive Systems
1 Features
3 Description
•
•
•
•
•
•
•
•
•
•
Gain Bandwidth Product (GBW): 50 MHz
Quiescent Current: 900 µA (Typical)
Broadband Noise: 3.8 nV/√Hz
Input Offset Drift: 1.5 μV/°C (Maximum)
Offset Voltage: 120 µV (Typical)
Input Bias Current: 10 pA (Maximum)
Rail-to-Rail Output (RRO)
Decompensated, Gain ≥ 6 V/V (Stable)
Power Down Current: 1 µA (Maximum)
Supply Range: 2.2 V to 5.5 V
The
OPA607
and
OPA2607
devices
are
decompensated, minimum gain of 6 V/V stable,
general-purpose CMOS operational amplifier with low
noise of 3.8 nV/√ Hz and a GBW of 50 MHz.
The low noise and wide bandwidth of the OPAx607
devices make them attractive for general-purpose
applications which require a good balance between
cost and performance. The high-impedance CMOS
inputs make the OPAx607 devices an ideal amplifier
to interface with sensors with high output impedance
(for example, piezoelectric transducers).
2 Applications
The OPAx607 devices feature a Power Down mode
with a maximum quiescent current of less than 1 µA,
making the device suitable for use in portable battery-
powered applications. The rail-to-rail output (RRO) of
the OPAx607 devices can swing up to 8 mV from the
supply rails, maximizing dynamic range.
•
•
•
•
•
•
•
•
•
Current-Sensing
Fish Finders and Sonar
Ultrasonic Flow Meters
Garden and Power Tools
Printers
Light Curtains and Safety Guards
Optical Modules
The OPAx607 is optimized for low supply voltage
operation as low as 2.2 V (±1.1 V) and up to 5.5 V
(±2.75 V), and is specified over the temperature range
of –40°C to +125°C.
Handheld Test Equipment
PM2.5 and PM10 Particle Sensors
Device Information(1)
PART NUMBER
OPA607
PACKAGE
BODY SIZE (NOM)
2.00 mm × 1.25 mm
2.90 mm × 1.60 mm
4.90 mm × 3.91 mm
3.00 mm × 3.00 mm
1.50 mm × 2.00 mm
SC70 (6)
SOT23 (5)
SOIC (8)
OPA2607
VSSOP (8)
X2QFN (10)
(1) See the orderable addendum at the end of the data sheet for
all available packages.
Short Circuit
Detection
Transimpedance
stage
VTH
œ
LOAD
+
VREF
RF
TLV3201
OPA607
ADS7042
LED driver
+
Þ
VS+
VS+
RG
RF
ISH
œ
REXT
ADS7042
OPA607
RG
CEXT
+
Photodiode
CF
VREF
OPAx607 for Transimpedance Application
OPAx607 for Current-Sensing Application
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: OPA607 OPA2607
Copyright © 2021 Texas Instruments Incorporated
Submit Document Feedback
1