5秒后页面跳转
捷配首页

Datasheet > OPA569AIDWPRG4
OPA569AIDWPRG4 PDF预览

OPA569AIDWPRG4

更新时间： 2024-11-28 21:14:31
品牌 Logo 应用领域
德州仪器 - TI 放大器光电二极管
页数 文件大小 规格书
28页 1105K
描述
Power Op Amp, Output Signal Swings Within 200mV of Rails at 2A Output Current 20-SO PowerPAD -55 to 125

阅读下载

中文翻译

获取价格

OPA569AIDWPRG4 技术参数

是否无铅： 含铅是否Rohs认证： 符合
生命周期：Obsolete零件包装代码：SOIC
包装说明：GREEN, PLASTIC, SOP-20针数：20
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8542.33.00.01风险等级：5.39
放大器类型：OPERATIONAL AMPLIFIER架构：VOLTAGE-FEEDBACK
最大平均偏置电流 (IIB)：0.00001 µA25C 时的最大偏置电流 (IIB)：0.00001 µA
标称共模抑制比：80 dB频率补偿：YES
最大输入失调电压：2000 µVJESD-30 代码：R-PDSO-G20
JESD-609代码：e4长度：12.825 mm
低-偏置：YES低-失调：NO
微功率：NO湿度敏感等级：2
功能数量：1端子数量：20
最高工作温度：125 °C最低工作温度：-55 °C
封装主体材料：PLASTIC/EPOXY封装代码：HSOP
封装等效代码：SOP20,.4封装形状：RECTANGULAR
封装形式：SMALL OUTLINE, HEAT SINK/SLUG包装方法：TAPE AND REEL
峰值回流温度（摄氏度）：260功率：YES
电源：3/5 V可编程功率：NO
认证状态：Not Qualified座面最大高度：2.65 mm
标称压摆率：1.2 V/us子类别：Operational Amplifier
最大压摆率：11 mA供电电压上限：7.5 V
标称供电电压 (Vsup)：5 V表面贴装：YES
温度等级：MILITARY端子面层：Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式：GULL WING端子节距：1.27 mm
端子位置：DUAL处于峰值回流温度下的最长时间：NOT SPECIFIED
标称均一增益带宽：1200 kHz宽带：NO
宽度：7.52 mmBase Number Matches：1

OPA569AIDWPRG4 数据手册

 浏览型号OPA569AIDWPRG4的Datasheet PDF文件第2页浏览型号OPA569AIDWPRG4的Datasheet PDF文件第3页浏览型号OPA569AIDWPRG4的Datasheet PDF文件第4页浏览型号OPA569AIDWPRG4的Datasheet PDF文件第5页浏览型号OPA569AIDWPRG4的Datasheet PDF文件第6页浏览型号OPA569AIDWPRG4的Datasheet PDF文件第7页 
OPA569  
O
P
A
5
6
9
SBOS264A – DECEMBER 2002 – REVISED DECEMBER 2003  
Rail-to-Rail I/O, 2A  
POWER AMPLIFIER  
DESCRIPTION  
FEATURES  
The OPA569 is a low-cost, high-current, operational amplifier  
designed for driving a wide variety of loads while operating on  
low-voltage supplies. It operates from either single or dual  
supplies for design flexibility and has rail-to-rail swing on the  
input and output. Typical output swing is within 150mV of the  
supply rails, with output current of 2A. Output swing closer to  
the rails is achievable with lighter loads.  
● HIGH OUTPUT CURRENT: 2A  
● OUTPUT SWINGS TO: 150mV of Rails with IO = 2A  
● THERMAL PROTECTION  
● ADJUSTABLE CURRENT LIMIT  
● TWO FLAGS: Current Limit and Temperature  
Warning  
The OPA569 is unity-gain stable, has low dc errors, is easy  
to use, and free from the phase inversion problems found in  
some power amplifiers. High performance is maintained at  
voltage swings near the output rails.  
● LOW SUPPLY VOLTAGE OPERATION: 2.7V to 5.5V  
● SHUTDOWN FUNCTION WITH OUTPUT DISABLE  
● SMALL POWER PACKAGE: SO-20 PowerPAD™  
The OPA569 provides an accurate user-selected current  
limit that is set with an external resistor, or digitally adjusted  
via a Digital-to-Analog Converter.  
APPLICATIONS  
● THERMOELECTRIC COOLER DRIVER  
● LASER DIODE PUMP DRIVER  
● VALVE, ACTUATOR DRIVER  
● SYNCHRO, SERVO DRIVER  
● TRANSDUCER EXCITATION  
The OPA569 output can be independently disabled using the  
Enable pin, saving power and protecting the load.  
The IMONITOR pin provides a 1:475 bidirectional copy of the  
output current. This eliminates the need for a series current  
shunt resistor, allowing more voltage to be applied to the  
load. This pin can be used for simple monitoring, or feedback  
control to establish constant output current.  
● GENERAL LINEAR POWER BOOSTER FOR  
OP AMPS  
Two flags are provided: one for warning of thermal over-  
stress, and one for current limit condition. The Thermal Flag  
pin can be connected to the Enable pin to provide a thermal  
shutdown solution.  
● PARALLELING OPTION FOR HIGHER  
CURRENT APPLICATIONS  
Current  
Limit  
Flag  
Thermal  
Flag  
V+  
12,13  
Enable  
Packaged in the Texas Instruments PowerPAD™ package,  
it is small and easy to heat-sink. The OPA569 is specified for  
operation over the industrial temperature range, –40°C to  
+85°C.  
(1)  
7
5
–In  
4
8
Parallel Out 1  
VO  
2
14, 15  
OPA569  
9
Parallel Out 2  
19  
6
3
+In  
I = IO/475  
Current  
Limit  
Set  
17, 18  
NOTE: (1) Connect  
for thermal protection.  
RSET  
V–  
IMONITOR  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PowerPAD is a trademark of Texas Instruments. All other trademarks are the property of their respective owners.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
testing of all parameters.  
Copyright © 2002-2003, Texas Instruments Incorporated  
www.ti.com  
1234567...28

中文翻译

下载PDF

OPA569AIDWPRG4 替代型号

型号 品牌 替代类型 描述 数据表
OPA569AIDWPR TI

类似代替

 Rail-to-Rail I/O, 2A POWER AMPLIFIER
OPA569AIDWP TI

功能相似

 Rail-to-Rail I/O, 2A POWER AMPLIFIER
OPA569AIDWPG4 TI

功能相似

 Power Op Amp, Output Signal Swings Within 200mV of Rails at 2A Output Current 20-SO PowerP

与OPA569AIDWPRG4相关器件

型号 品牌 获取价格 描述 数据表
OPA5723YGO KODENSHI

获取价格

 		Yellow Green LED Chip
OPA5816 KODENSHI

获取价格

 		Yellow LED Chip
OPA5923UYO KODENSHI

获取价格

 		Ultra Yellow LED Chip
OPA593 TI

获取价格

 		85V、100µV、宽带宽 (10MHz)、高输出电流 (250mA) 精密运算放大器
OPA5930UYO KODENSHI

获取价格

 		Ultra Yellow LED Chip
OPA593DNTR TI

获取价格

 		85V、100µV、宽带宽 (10MHz)、高输出电流 (250mA) 精密运算放大器 |
OPA593DNTT TI

获取价格

 		85V、100µV、宽带宽 (10MHz)、高输出电流 (250mA) 精密运算放大器 |
OPA600 BB

获取价格

 		Fast-Settling Wideband OPERATIONAL AMPLIFIER
OPA600BM BB

获取价格

 		Fast-Settling Wideband OPERATIONAL AMPLIFIER
OPA600CM BB

获取价格

 		Fast-Settling Wideband OPERATIONAL AMPLIFIER

与OPA569AIDWPRG4相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证