OPA4350-DIE
www.ti.com
SBOS603 –AUGUST 2012
HIGH-SPEED, SINGLE-SUPPLY, RAIL-TO-RAIL OPERATIONAL AMPLIFIER
MicroAmplifier™ SERIES
Check for Samples: OPA4350-DIE
1
FEATURES
2
•
•
•
•
•
•
•
Rail-to-Rail Input
Rail-to-Rail Output
Wide Bandwidth
High Slew Rate
Low Noise
APPLICATIONS
•
•
•
•
•
•
•
•
•
Cell Phone PA Control Loops
Driving A/D Converters
Video Processing
Data Acquisition
Low THD+Noise
Unity-Gain Stable
Process Control
Audio Processing
Communications
Active Filters
Test Equipment
DESCRIPTION
The OPA4350 rail-to-rail CMOS operational amplifier is optimized for low voltage, single-supply operation. Rail-
to-rail input/output, low noise, and high speed operation makes it ideal for driving sampling analog-to-digital (A/D)
converters. It is also well suited for cell phone PA control loops and video processing (75-Ω drive capability) as
well as audio and general purpose applications.
The OPA4350 operates on a single supply as low as 2.5 V with an input common-mode voltage range that
extends 300 mV below ground and 300 mV above the positive supply.
ORDERING INFORMATION(1)
PACKAGE
DESIGNATOR
PRODUCT
PACKAGE
ORDERABLE PART NUMBER
PACKAGE QUANTITY
OPA4350TDC1
OPA4350TDC2
130
10
OPA4350
TD
Bare Die In Waffle Pack(2)
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Processing is per the Texas Instruments commercial production baseline and is in compliance with the Texas Instruments Quality
Control System in effect at the time of manufacture. Electrical screening consists of DC parametric and functional testing at room
temperature only. Unless otherwise specified by Texas Instruments AC performance and performance over temperature is not
warranted. Visual Inspection is performed in accordance with MIL-STD-883 Test Method 2010 Condition B at 75X minimum.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
MicroAmplifier is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated