5秒后页面跳转
OPA3695IDBQ PDF预览

OPA3695IDBQ

更新时间: 2024-11-22 11:10:11
品牌 Logo 应用领域
德州仪器 - TI 放大器光电二极管运算放大器
页数 文件大小 规格书
37页 1086K
描述
具有禁用功能的超宽带电流反馈运算放大器 | DBQ | 16 | -40 to 85

OPA3695IDBQ 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SOIC
包装说明:SSOP,针数:16
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.33.00.01Factory Lead Time:1 week
风险等级:1.77放大器类型:OPERATIONAL AMPLIFIER
架构:CURRENT-FEEDBACK最大平均偏置电流 (IIB):30 µA
25C 时的最大偏置电流 (IIB):20 µA最小共模抑制比:51 dB
标称共模抑制比:56 dB频率补偿:YES
最大输入失调电压:3500 µVJESD-30 代码:R-PDSO-G16
JESD-609代码:e4长度:4.905 mm
低-偏置:NO低-失调:NO
微功率:NO湿度敏感等级:2
负供电电压上限:-6.5 V标称负供电电压 (Vsup):-5 V
功能数量:3端子数量:16
最高工作温度:85 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:SSOP
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, SHRINK PITCH
包装方法:TUBE峰值回流温度(摄氏度):260
功率:NO可编程功率:NO
认证状态:Not Qualified座面最大高度:1.75 mm
最小摆率:1700 V/us标称压摆率:2400 V/us
子类别:Operational Amplifier最大压摆率:13.3 mA
供电电压上限:6.5 V标称供电电压 (Vsup):5 V
表面贴装:YES技术:BIPOLAR
温度等级:INDUSTRIAL端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:GULL WING端子节距:0.635 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
标称均一增益带宽:1000000 kHz宽带:YES
宽度:3.895 mmBase Number Matches:1

OPA3695IDBQ 数据手册

 浏览型号OPA3695IDBQ的Datasheet PDF文件第2页浏览型号OPA3695IDBQ的Datasheet PDF文件第3页浏览型号OPA3695IDBQ的Datasheet PDF文件第4页浏览型号OPA3695IDBQ的Datasheet PDF文件第5页浏览型号OPA3695IDBQ的Datasheet PDF文件第6页浏览型号OPA3695IDBQ的Datasheet PDF文件第7页 
OP  
A3695  
OPA3695  
OP  
A3695  
www.ti.com ............................................................................................................................................... SBOS355AAPRIL 2008REVISED SEPTEMBER 2008  
Triple, Ultra-Wideband, Current-Feedback  
OPERATIONAL AMPLIFIER with Disable  
1
FEATURES  
DESCRIPTION  
2
900MHz BANDWIDTH, GAIN = +2V/V  
450MHz BANDWIDTH, GAIN = +8V/V  
WIDE OUTPUT VOLTAGE SWING: ±4V  
ULTRA-HIGH SLEW RATE: 4300V/µs  
3RD-ORDER INTERCEPT: > 35dBm (f < 40MHz)  
LOW 1.8nV/Hz VOLTAGE NOISE  
The OPA3695 is a triple, very high bandwidth,  
current-feedback op amp that combines an  
exceptional 4300V/µs slew rate and a very high  
900MHz bandwidth (G = +2V/V) to provide an  
amplifier that is ideal for the most demanding video  
applications. The device versatility is enhanced with a  
low 1.8nV/Hz input voltage noise and an output  
stage that can swing within 1V from the supply rail to  
deliver a high dynamic range signal, making it  
well-suited for analog-to-digital converter (ADC)  
front-ends or digital-to-analog converter (DAC) output  
buffering. Optimized for high gain operation, the  
OPA3695 is also well-suited for buffering surface  
acoustic wave (SAW) filters in an intermediate  
frequency (IF) system.  
±120mA OUTPUT CURRENT DRIVE  
12.9mA/Ch SUPPLY CURRENT (±5V)  
LOW 0.1mA/Ch DISABLE CURRENT  
3.5V to 12V SINGLE-SUPPLY OPERATION  
±1.75V to ±6V SPLIT-SUPPLY OPERATION  
APPLICATIONS  
The low 12.9mA/channel supply current is precisely  
trimmed at +25°C. This trim, along with a low  
temperature drift, gives low system power over  
temperature. System power may be further reduced  
using the Disable control pin. Leaving this pin open,  
or holding it high, gives normal operation. If pulled  
low, the OPA3695 supply current drops to  
100µA/channel. This power-saving feature, along with  
exceptional single +5V operation, makes the  
OPA3695 a good fit for low-power applications that  
require very high performance. The OPA3695 is  
available in an SSOP-16 package.  
BROADBAND VIDEO LINE DRIVERS  
VERY WIDEBAND ADC DRIVERS  
HIGH BANDWIDTH INSTRUMENTATION  
AMPLIFIERS  
HIGH-SPEED IMAGING  
ACTIVE FILTERS  
ARB WAVEFORM OUTPUT DRIVERS  
MONITOR OUTPUT  
604W  
R
G
B
75W  
+5V  
OPA3695 RELATED PRODUCTS  
604W  
75W  
-
A
SINGLES  
OPA695  
OPA691  
OPA692  
OPA693  
OPA694  
DUALS  
OPA2695  
OPA2691  
THS3202  
TRIPLES  
OPA3695  
OPA3691  
OPA3692  
OPA3693  
ADC/  
+
DECODER  
75W  
0.1mF  
0.1mF  
0.1mF  
75W  
604W  
RED  
75W  
604W  
75W  
RED  
-
B
GREEN  
GREEN  
BLUE  
+
75W  
OPA2694  
75W  
604W  
BLUE  
75W  
604W  
TVP7002  
75W  
-
C
+
75W  
-5V  
OPA3695  
75W  
Figure 1. Typical RGB Input/Output Buffer  
Application  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
2
All trademarks are the property of their respective owners.  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2008, Texas Instruments Incorporated  
 

OPA3695IDBQ 替代型号

型号 品牌 替代类型 描述 数据表
OPA3695IDBQG4 TI

完全替代

1 CHANNEL, VIDEO AMPLIFIER, PDSO16, GREEN, PLASTIC, SSOP-16
OPA3695IDBQRG4 TI

类似代替

1 CHANNEL, VIDEO AMPLIFIER, PDSO16, GREEN, PLASTIC, SSOP-16

与OPA3695IDBQ相关器件

型号 品牌 获取价格 描述 数据表
OPA3695IDBQG4 TI

获取价格

1 CHANNEL, VIDEO AMPLIFIER, PDSO16, GREEN, PLASTIC, SSOP-16
OPA3695IDBQRG4 TI

获取价格

1 CHANNEL, VIDEO AMPLIFIER, PDSO16, GREEN, PLASTIC, SSOP-16
OPA369AIDCKR BB

获取价格

1.8V, 1レA max, Zer┆-Crossover RAIL-TO-RAIL I/
OPA369AIDCKR TI

获取价格

1.8V, 700nA, Zerø-Crossover RAIL-TO-RAIL I/O
OPA369AIDCKT BB

获取价格

1.8V, 1レA max, Zer┆-Crossover RAIL-TO-RAIL I/
OPA369AIDCKT TI

获取价格

1.8V, 700nA, Zerø-Crossover RAIL-TO-RAIL I/O
OPA37 BB

获取价格

Ultra-Low Noise Precision OPERATIONAL AMPLIFIERS
OPA37 TI

获取价格

Ultra-Low Noise, Precision OPERATIONAL AMPLIFIERS
OPA373 BB

获取价格

6.5MHz, 585UA, Rail-to-Rail I/O CMOS Operational Amplifier
OPA373 TI

获取价格

CMOS Operational Amplifier