5秒后页面跳转
OPA2726AIDGSTG4 PDF预览

OPA2726AIDGSTG4

更新时间: 2024-11-05 11:09:59
品牌 Logo 应用领域
德州仪器 - TI 放大器光电二极管
页数 文件大小 规格书
31页 1155K
描述
Dual, 12-V, 20-MHz, low-power operational amplifier | DGS | 10 | -40 to 125

OPA2726AIDGSTG4 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:MSOP
包装说明:TSSOP, TSSOP10,.19,20针数:10
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.33.00.01Factory Lead Time:6 weeks
风险等级:5.45放大器类型:OPERATIONAL AMPLIFIER
架构:VOLTAGE-FEEDBACK最大平均偏置电流 (IIB):0.0002 µA
25C 时的最大偏置电流 (IIB):0.0002 µA最小共模抑制比:88 dB
标称共模抑制比:94 dB频率补偿:YES
最大输入失调电流 (IIO):0.00005 µA最大输入失调电压:3000 µV
JESD-30 代码:S-PDSO-G10JESD-609代码:e4
长度:3 mm低-偏置:YES
低-失调:NO微功率:NO
湿度敏感等级:2负供电电压上限:-6.6 V
标称负供电电压 (Vsup):-6 V功能数量:2
端子数量:10最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:TSSOP封装等效代码:TSSOP10,.19,20
封装形状:SQUARE封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
包装方法:TR峰值回流温度(摄氏度):260
功率:NO电源:+-2/+-6/4/12 V
可编程功率:NO认证状态:Not Qualified
座面最大高度:1.1 mm标称压摆率:30 V/us
子类别:Operational Amplifier最大压摆率:5.5 mA
供电电压上限:6.6 V标称供电电压 (Vsup):6 V
表面贴装:YES技术:CMOS
温度等级:AUTOMOTIVE端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:GULL WING端子节距:0.5 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
标称均一增益带宽:20000 kHz最小电压增益:63100
宽带:NO宽度:3 mm

OPA2726AIDGSTG4 数据手册

 浏览型号OPA2726AIDGSTG4的Datasheet PDF文件第2页浏览型号OPA2726AIDGSTG4的Datasheet PDF文件第3页浏览型号OPA2726AIDGSTG4的Datasheet PDF文件第4页浏览型号OPA2726AIDGSTG4的Datasheet PDF文件第5页浏览型号OPA2726AIDGSTG4的Datasheet PDF文件第6页浏览型号OPA2726AIDGSTG4的Datasheet PDF文件第7页 
OPA725, OPA2725  
OPA726, OPA2726  
SBOS278B − SEPTEMBER 2003 − REVISED JANUARY 2004  
Very Low Noise, High-Speed, 12V CMOS  
Operational Amplifier  
FD EATURES  
DESCRIPTION  
The OPA725 and OPA726 series op amps use a  
state-of-the-art 12V analog CMOS process, and combine  
outstanding ac performance with low bias current and  
excellent CMRR, PSRR, and AOL  
Gain-Bandwidth (GBW) Product is achieved by using a  
proprietary and patent-pending output stage design.  
These characteristics allow excellent 16-bit settling times  
for driving 16-bit Analog-to-Digital converters (ADCs).  
BANDWIDTH: 20MHz  
SLEW RATE: 30V/µs  
D
D
D
D
D
D
D
D
D
D
FAST 16-BIT SETTLING TIME  
LOW NOISE: 6nV/Hz (typ) at 100kHz  
EXCELLENT CMRR, PSRR, and A  
OL  
RAIL-TO-RAIL OUTPUT  
.
The 20MHz  
CM RANGE INCLUDES GND  
THD+N: 0.0003% (typ) at 1kHz  
QUIESCENT CURRENT: 5.5mA/ch (max)  
SUPPLY VOLTAGE: 4V to 12V  
SHUTDOWN MODE (OPAx726): 6µA/ch  
Excellent ac characteristics, such as 20MHz GBW, 30V/µs  
slew rate and 0.0003% THD+N make the OPA725 and  
OPA726 well-suited for communication, high-end audio,  
and active filter applications. With a bias current of less  
than 200pA, they are well-suited for use as  
transimpedance (I/V-conversion) amplifiers for monitoring  
optical power in ONET applications.  
AD PPLICATIONS  
OPTICAL NETWORKING  
D
D
D
D
D
D
D
D
TRANSIMPEDANCE AMPLIFIERS  
INTEGRATORS  
ACTIVE FILTERS  
A/D CONVERTER BUFFERS  
I/V CONVERTER FOR DACs  
PORTABLE AUDIO  
PROCESS CONTROL  
TEST EQUIPMENT  
The OPA725 and OPA726 op amps can be used in  
single-supply applications from 4V up to 12V, or  
dual-supply from 2V to 6V. The output swings to within  
150mV of the rails, maximizing dynamic range. The  
shutdown versions (OPAx726) reduce the quiescent  
current to less than 6µA and feature a reference pin for  
easy shutdown operation with standard CMOS logic in  
dual-supply applications.  
OPA725 RELATED PRODUCTS  
FEATURES  
The OPA725 (single) is available in SOT23-5 and SO-8  
packages, and the OPA2725 (dual) is available in MSOP-8  
and SO-8 packages. The OPA726 (single with shutdown)  
is available in MSOP-8 and SO-8. The OPA2726 (dual with  
shutdown) is available in MSOP-10. All versions are  
specified for operation from −40°C to +125°C.  
PRODUCT  
10MHz, 16V, 16V/µs, 8.5nV/Hz at 1kHz  
TLC080  
OPA132  
OPA380  
OPA656  
OPA743  
ADS8342  
8MHz, 36V, FET Input, 20V/µs, 8.5nV/Hz at 1kHz  
100MHz, 5.5V, Precision Transimpedance Amplifier  
500MHz, 5V, FET Input, 290V/µs, 7nV/Hz at 100kHz  
7MHz, 12V, RRIO, 10V/µs, 30nV/Hz at 10kHz  
16-Bit, 250kSPS, 4-Channel, Parallel Output ADC  
+5V  
+5V  
+12V  
75  
OPA725  
AIN  
VIN  
OPA726  
VOUT  
ADS8342  
16Bit ADC  
Common  
λ
2.5V  
330pF  
5V  
Enable  
V
5V  
B
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments  
semiconductor products and disclaimers thereto appears at the end of this data sheet.  
All trademarks are the property of their respective owners.  
ꢀꢁ ꢂ ꢃꢄ ꢅ ꢆꢇ ꢂꢈ ꢃ ꢉꢆꢉ ꢊꢋ ꢌꢍ ꢎ ꢏꢐ ꢑꢊꢍꢋ ꢊꢒ ꢓꢔ ꢎ ꢎ ꢕꢋꢑ ꢐꢒ ꢍꢌ ꢖꢔꢗ ꢘꢊꢓ ꢐꢑꢊ ꢍꢋ ꢙꢐ ꢑꢕꢚ ꢀꢎ ꢍꢙꢔ ꢓꢑꢒ  
ꢓ ꢍꢋ ꢌꢍꢎ ꢏ ꢑꢍ ꢒ ꢖꢕ ꢓ ꢊ ꢌꢊ ꢓ ꢐ ꢑꢊ ꢍꢋꢒ ꢖ ꢕꢎ ꢑꢛꢕ ꢑꢕ ꢎ ꢏꢒ ꢍꢌ ꢆꢕꢜ ꢐꢒ ꢇꢋꢒ ꢑꢎ ꢔꢏ ꢕꢋꢑ ꢒ ꢒꢑ ꢐꢋꢙ ꢐꢎ ꢙ ꢝ ꢐꢎ ꢎ ꢐ ꢋꢑꢞꢚ  
ꢀꢎ ꢍ ꢙꢔꢓ ꢑ ꢊꢍ ꢋ ꢖꢎ ꢍ ꢓ ꢕ ꢒ ꢒ ꢊꢋ ꢟ ꢙꢍ ꢕ ꢒ ꢋꢍꢑ ꢋꢕ ꢓꢕ ꢒꢒ ꢐꢎ ꢊꢘ ꢞ ꢊꢋꢓ ꢘꢔꢙ ꢕ ꢑꢕ ꢒꢑꢊ ꢋꢟ ꢍꢌ ꢐꢘ ꢘ ꢖꢐ ꢎ ꢐꢏ ꢕꢑꢕ ꢎ ꢒꢚ  
Copyright 2003−2004, Texas Instruments Incorporated  
www.ti.com  

OPA2726AIDGSTG4 替代型号

型号 品牌 替代类型 描述 数据表
OPA2726AIDGST TI

完全替代

Dual, 12-V, 20-MHz, low-power operational amplifier | DGS | 10 | -40 to 125
OPA2725AIDG4 TI

类似代替

双路、12V、20MHz、低功耗、低失调电压运算放大器 | D | 8 | -40 to
OPA2725AIDGKTG4 TI

类似代替

Dual Very Low Noise, High-Speed, 12V CMOS Operational Amplifier 8-VSSOP -40 to 125

与OPA2726AIDGSTG4相关器件

型号 品牌 获取价格 描述 数据表
OPA2727 TI

获取价格

e-trim 20MHz, High Precision CMOS
OPA2727 BB

获取价格

20MHz, High Precision CMOS Operational Amplifier
OPA2727AID TI

获取价格

e-trim 20MHz, High Precision CMOS
OPA2727AIDG4 TI

获取价格

e-trim 20MHz, High Precision CMOS
OPA2727AIDR TI

获取价格

e-trim 20MHz, High Precision CMOS
OPA2727AIDRB TI

获取价格

DUAL OP-AMP, 150uV OFFSET-MAX, 20MHz BAND WIDTH, PDSO8, PLASTIC, DFN-8
OPA2727AIDRBR TI

获取价格

e-trim 20MHz, High Precision CMOS
OPA2727AIDRBRG4 TI

获取价格

e-trim 20MHz, High Precision CMOS
OPA2727AIDRBT TI

获取价格

e-trim 20MHz, High Precision CMOS
OPA2727AIDRBTG4 TI

获取价格

e-trim 20MHz, High Precision CMOS