OPA2690
SBOS238D − JUNE 2002 − REVISED DECEMBER 2004
Dual, Wideband, Voltage-Feedback
OPERATIONAL AMPLIFIER with Disable
FD EATURES
DESCRIPTION
FLEXIBLE SUPPLY RANGE:
+5V to +12V Single Supply
2.5V to 6V Dual Supply
The OPA2690 represents a major step forward in
unity-gain stable, voltage-feedback op amps. A new
internal architecture provides slew rate and full-power
bandwidth previously found only in wideband,
D
D
D
D
D
D
WIDEBAND +5V OPERATION: 220MHz (G = 2)
HIGH OUTPUT CURRENT: 190mA
OUTPUT VOLTAGE SWING: 4.0V
HIGH SLEW RATE: 1800V/µs
LOW SUPPLY CURRENT: 5.5mA/ch
LOW DISABLED CURRENT: 100µA/ch
current-feedback op amps.
A new output stage
architecture delivers high currents with a minimal
headroom requirement. These give exceptional
single-supply operation. Using a single +5V supply, the
OPA2690 can deliver a 1V to 4V output swing with over
120mA drive current and 150MHz bandwidth. This
combination of features makes the OPA2690 an ideal
RGB line driver or single-supply Analog-to-Digital
Converter (ADC) input driver.
AD PPLICATIONS
The low 5.5mA/ch supply current of the OPA2690 is
precisely trimmed at +25°C. This trim, along with low
temperature drift, ensures lower maximum supply current
than competing products. System power may be reduced
further using the optional disable control pin. Leaving this
disable pin open, or holding it HIGH, will operate the
OPA2690I-14D normally. If pulled LOW, the
OPA2690I-14D supply current drops to less than
200µA/ch while the output goes to a high-impedance
state.
VIDEO LINE DRIVING
D
D
D
D
D
D
xDSL LINE DRIVER/RECEIVER
HIGH-SPEED IMAGING CHANNELS
ADC BUFFERS
PORTABLE INSTRUMENTS
TRANSIMPEDANCE AMPLIFIERS
ACTIVE FILTERS
OPA2690 RELATED PRODUCTS
+5V
100Ω
2kΩ
+2.5V
SINGLES
DUALS
TRIPLES
+2.5V
+5V
F
100pF
0.1
µ
Voltage-Feedback
Current-Feedback
Fixed Gain
OPA2690
OPA691
OPA692
OPA2680
OPA2691
—
OPA3690
OPA3691
OPA3692
1/2
2k
Ω
O P A 2690
REFB
REFT
499Ω
0.1µF
1k
Ω
35Ω
499Ω
499Ω
HARMONIC DISTORTION vs FREQUENCY
FOR THE SINGLE−SUPPLY ADC DRIVER
IN
IN
10pF
ADS825
−
−
−
−
−
−
−
−
−
−
2.5VCM
2VPP
50
55
60
65
70
75
80
85
90
95
VIN
2VPP Differential Output
10−Bit
40MSPS
35Ω
1k
Ω
10pF
1/2
O P A 2690
Clock
499
Ω
+2.5V
3rd−Harmonic
2nd−Harmonic
Single-Supply Differential ADC Driver
−
100
1
10
20
Frequency (MHz)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
ꢀꢁ ꢂ ꢃꢄ ꢅ ꢆꢇ ꢂꢈ ꢃ ꢉꢆꢉ ꢊꢋ ꢌꢍ ꢎ ꢏꢐ ꢑꢊꢍꢋ ꢊꢒ ꢓꢔ ꢎ ꢎ ꢕꢋꢑ ꢐꢒ ꢍꢌ ꢖꢔꢗ ꢘꢊꢓ ꢐꢑꢊ ꢍꢋ ꢙꢐ ꢑꢕꢚ ꢀꢎ ꢍꢙꢔ ꢓꢑꢒ
ꢓ ꢍꢋ ꢌꢍꢎ ꢏ ꢑꢍ ꢒ ꢖꢕ ꢓ ꢊ ꢌꢊ ꢓ ꢐ ꢑꢊ ꢍꢋꢒ ꢖ ꢕꢎ ꢑꢛꢕ ꢑꢕ ꢎ ꢏꢒ ꢍꢌ ꢆꢕꢜ ꢐꢒ ꢇꢋꢒ ꢑꢎ ꢔꢏ ꢕꢋꢑ ꢒ ꢒꢑ ꢐꢋꢙ ꢐꢎ ꢙ ꢝ ꢐꢎ ꢎ ꢐ ꢋꢑꢞꢚ
ꢀꢎ ꢍ ꢙꢔꢓ ꢑ ꢊꢍ ꢋ ꢖꢎ ꢍ ꢓ ꢕ ꢒ ꢒ ꢊꢋ ꢟ ꢙꢍ ꢕ ꢒ ꢋꢍꢑ ꢋꢕ ꢓꢕ ꢒꢒ ꢐꢎ ꢊꢘ ꢞ ꢊꢋꢓ ꢘꢔꢙ ꢕ ꢑꢕ ꢒꢑꢊ ꢋꢟ ꢍꢌ ꢐꢘ ꢘ ꢖꢐ ꢎ ꢐꢏ ꢕꢑꢕ ꢎ ꢒꢚ
Copyright 2002−2004, Texas Instruments Incorporated
www.ti.com