OPA357
OPA2357
SBOS235C − MARCH 2002− REVISED MAY 2004
250MHz, Rail-to-Rail I/O, CMOS
Operational Amplifier with Shutdown
FEATURES
DESCRIPTION
The OPA357 series of high-speed, voltage-feedback
CMOS operational amplifiers are designed for video and
other applications requiring wide bandwidth. They are
unity-gain stable and can drive large output currents.
Differential gain is 0.02% and differential phase is 0.09°.
Quiescent current is only 4.9mA per channel.
D
D
D
D
D
D
D
UNITY-GAIN BANDWIDTH: 250MHz
WIDE BANDWIDTH: 100MHz GBW
HIGH SLEW RATE: 150V/ms
LOW NOISE: 6.5nV/√Hz
RAIL-TO-RAIL I/O
The OPA357 series op amps are optimized for operation
on single or dual supplies as low as 2.5V ( 1.25V) and up
to 5.5V ( 2.75V). Common-mode input range extends
beyond the supplies. The output swing is within 100mV of
the rails, supporting wide dynamic range.
HIGH OUTPUT CURRENT: > 100mA
EXCELLENT VIDEO PERFORMANCE:
Diff Gain: 0.02%, Diff Phase: 0.095
0.1dB Gain Flatness: 40MHz
D
D
D
D
D
D
LOW INPUT BIAS CURRENT: 3pA
QUIESCENT CURRENT: 4.9mA
THERMAL SHUTDOWN
For applications requiring the full 100mA continuous
output current, the single SO-8 PowerPAD version is
available.
The single version (OPA357), comes in the miniature
SOT23-6 and SO-8 PowerPAD packages. The dual
version (OPA2357) is offered in the MSOP-10 package.
SUPPLY RANGE: 2.5V to 5.5V
SHUTDOWN I < 6mA
Q
MicroSIZE AND PowerPAD PACKAGES
The dual version features completely independent
circuitry for lowest crosstalk and freedom from interaction.
All are specified over the extended −40°C to +125°C
temperature range.
APPLICATIONS
OPAx357 RELATED PRODUCTS
FEATURES
D
D
D
D
D
D
D
VIDEO PROCESSING
PRODUCT
OPAx354
ULTRASOUND
Non-Shutdown Version of OPA357 Family
OPTICAL NETWORKING, TUNABLE LASERS
PHOTODIODE TRANSIMPEDANCE AMPS
ACTIVE FILTERS
200MHz GBW, Rail-to-Rail Output, CMOS, Shutdown OPAx355
200MHz GBW, Rail-to-Rail Output, CMOS
38MHz GBW, Rail-to-Rail Input/Output, CMOS
75MHz BW G = 2, Rail-to-Rail Output
OPAx356
OPAx350/3
OPAx631
OPAx634
THS412x
HIGH-SPEED INTEGRATORS
ANALOG-TO-DIGITAL (A/D) CONVERTER
INPUT BUFFERS
150MHz BW G = 2, Rail-to-Rail Output
100MHz BW, Differential Input/Output, 3.3V Supply
D
DIGITAL-TO-ANALOG (D/A) CONVERTER
OUTPUT AMPLIFIERS
D
BARCODE SCANNERS
COMMUNICATIONS
V+
D
−
VIN
VOUT
OPA357
+VIN
−
V
Enable
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
ꢀꢁ ꢂ ꢃꢄ ꢅ ꢆꢇ ꢂꢈ ꢃ ꢉꢆꢉ ꢊꢋ ꢌꢍ ꢎ ꢏꢐ ꢑꢊꢍꢋ ꢊꢒ ꢓꢔ ꢎ ꢎ ꢕꢋꢑ ꢐꢒ ꢍꢌ ꢖꢔꢗ ꢘꢊꢓ ꢐꢑꢊ ꢍꢋ ꢙꢐ ꢑꢕꢚ ꢀꢎ ꢍꢙꢔ ꢓꢑꢒ
ꢓ ꢍꢋ ꢌꢍꢎ ꢏ ꢑꢍ ꢒ ꢖꢕ ꢓ ꢊ ꢌꢊ ꢓ ꢐ ꢑꢊ ꢍꢋꢒ ꢖ ꢕꢎ ꢑꢛꢕ ꢑꢕ ꢎ ꢏꢒ ꢍꢌ ꢆꢕꢜ ꢐꢒ ꢇꢋꢒ ꢑꢎ ꢔꢏ ꢕꢋꢑ ꢒ ꢒꢑ ꢐꢋꢙ ꢐꢎ ꢙ ꢝ ꢐꢎ ꢎ ꢐ ꢋꢑꢞꢚ
ꢀꢎ ꢍ ꢙꢔꢓ ꢑ ꢊꢍ ꢋ ꢖꢎ ꢍ ꢓ ꢕ ꢒ ꢒ ꢊꢋ ꢟ ꢙꢍ ꢕ ꢒ ꢋꢍꢑ ꢋꢕ ꢓꢕ ꢒꢒ ꢐꢎ ꢊꢘ ꢞ ꢊꢋꢓ ꢘꢔꢙ ꢕ ꢑꢕ ꢒꢑꢊ ꢋꢟ ꢍꢌ ꢐꢘ ꢘ ꢖꢐ ꢎ ꢐꢏ ꢕꢑꢕ ꢎ ꢒꢚ
Copyright 2002-2004, Texas Instruments Incorporated
www.ti.com