OPA2314-EP
www.ti.com
SBOS597 –SEPTEMBER 2012
3-MHz, LOW-POWER, LOW-NOISE, RRI/O, 1.8-V CMOS OPERATIONAL AMPLIFIER
Check for Samples: OPA2314-EP
1
FEATURES
•
•
•
•
•
•
•
•
Low IQ: 150 µA/ch (max)
Wide Supply Range: 1.8 V to 5.5 V
Low Noise: 14 nV/√Hz at 1 kHz
Gain Bandwidth: 3 MHz
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
•
•
•
•
Controlled Baseline
One Assembly or Test Site
One Fabrication Site
Low Input Bias Current: 0.2 pA
Low Offset Voltage: 0.5 mV
Unity-Gain Stable
Available in Extended (–40°C to 150°C)
Temperature Range
(1)
•
•
•
Extended Product Life Cycle
Extended Product-Change Notification
Product Traceability
Internal RF/EMI Filter
APPLICATIONS
•
Battery-Powered Instruments:
–
–
Consumer, Industrial, Medical
Notebooks, Portable Media Players
•
•
•
•
•
Photodiode Amplifiers
Active Filters
Remote Sensing
Wireless Metering
Handheld Test Equipment
(1) Additional temperature ranges available - contact factory
DESCRIPTION
The OPA2314 is a dual channel operational amplifier and represents a new generation of low-power, general-
purpose CMOS amplifiers. Rail-to-rail input and output swings, low quiescent current (150 μA typ at
5.0 VS) combined with a wide bandwidth of 3 MHz, and very low noise (14 nV/√Hz at 1 kHz) make this family
very attractive for a variety of battery-powered applications that require a good balance between cost and
performance. The low input bias current supports applications with mega-ohm source impedances.
The robust design of the OPA2314 provides ease-of-use to the circuit designer: unity-gain stability with
capacitive loads of up to 300 pF, an integrated RF/EMI rejection filter, no phase reversal in overdrive conditions,
and high ESD protection (4-kV HBM).
This device is optimized for low-voltage operation as low as +1.8 V (±0.9 V) and up to +5.5 V (±2.75 V), and is
specified over the full extended temperature range of –40°C to +150°C.
The OPA2314 (dual) is offered in a DFN-8 package.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2012, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.