Support &
Community
Product
Folder
Order
Now
Tools &
Software
Technical
Documents
OPA192-Q1, OPA2192-Q1
SBOS850 –DECEMBER 2017
OPAx192-Q1 36-V Precision, Rail-to-Rail Input/Output,
Low-Offset Voltage, Low-Input Bias Current Op Amp With e-trim™
1 Features
3 Description
The OPAx192-Q1 family (OPA192-Q1 and OPA2192-
1
•
•
Qualified for Automotive Applications
Q1) is a new generation of 36-V, e-trim operational
amplifiers. The OPAx192-Q1 family of operational
amplifiers use e-trim™, a method of package-level
trim for offset and offset temperature drift
implemented during the final steps of manufacturing
after the plastic molding process. This method
minimizes the influence of inherent input transistor
mismatch, as well as errors induced during package
molding.
AEC-Q100 Qualified with the Following Results:
–
Device Temperature Grade 1: –40°C to
+125°C Ambient Operating Temperature
–
–
Device HBM ESD Classification Level 3A
Device CDM ESD Classification Level 4A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Low Offset Voltage: ±5 µV
Low Offset Voltage Drift: ±0.2 µV/°C
Low Noise: 5.5 nV/√Hz at 1 kHz
High Common-Mode Rejection: 140 dB
Low Bias Current: ±5 pA
These devices offer outstanding dc precision and ac
performance, including rail-to-rail input/output, low
offset (±5 µV, typical), low offset drift (±0.2 µV/°C,
typical), and 10-MHz bandwidth.
Rail-to-Rail Input and Output
Unique features such as differential input-voltage
range to the supply rail, high output current (±65 mA),
high capacitive-load drive of up to 1 nF, and high
slew rate (20 V/µs) make the OPAx192-Q1 a robust,
high-performance operational amplifier for high-
voltage industrial applications.
Wide Bandwidth: 10 MHz GBW
High Slew Rate: 20 V/µs
Low Quiescent Current: 1 mA per Amplifier
Wide Supply: ±2.25 V to ±18 V, 4.5 V to 36 V
EMI/RFI Filtered Inputs
The OPAx192-Q1 family of op amps is available in an
8-pin VSSOP package and is specified from –40°C to
+125°C.
Differential Input Voltage Range to Supply Rail
High Capacitive-Load-Drive Capability: 1 nF
Industry-Standard Package:
Device Information(1)
–
Single and Dual Channel in VSSOP-8
PART NUMBER
OPA192-Q1
PACKAGE
BODY SIZE (NOM)
2 Applications
VSSOP (8)
3.00 mm × 3.00 mm
OPA2192-Q1
•
•
•
•
Motor Control for Automotive
Traction Inverter
(1) For all available packages, see the package option addendum
at the end of the data sheet.
On-Board Charger
Precision Current Sensing
OPAx192-Q1 Maintains Ultra-Low Input Offset Voltage Over Temperature
100
66 Typical Units Shown
75
50
25
0
œ25
œ50
œ75
œ100
œ75 œ50 œ25
0
25
50
75
100 125 150
Temperature (°C)
C001
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.