5秒后页面跳转
OPA192IDBVT PDF预览

OPA192IDBVT

更新时间: 2024-11-04 12:19:23
品牌 Logo 应用领域
德州仪器 - TI 运算放大器电子
页数 文件大小 规格书
35页 2808K
描述
High Voltage, Rail-to-Rail Input/Output, Precision Operational Amplifiers, e-trim Series

OPA192IDBVT 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SOT-23
包装说明:SOT-23, 5 PIN针数:5
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.33.00.01Factory Lead Time:6 weeks
风险等级:1.13Samacsys Description:High-Voltage, Rail-to-Rail Input/Output, 5?V, 0.2?V/?C, Precision Operational Amplifier
放大器类型:OPERATIONAL AMPLIFIER架构:VOLTAGE-FEEDBACK
最大平均偏置电流 (IIB):0.00002 µA25C 时的最大偏置电流 (IIB):0.00002 µA
最小共模抑制比:100 dB标称共模抑制比:120 dB
频率补偿:YES最大输入失调电流 (IIO):0.002 µA
最大输入失调电压:25 µVJESD-30 代码:R-PDSO-G5
JESD-609代码:e4长度:2.9 mm
低-偏置:YES低-失调:YES
微功率:NO湿度敏感等级:2
负供电电压上限:-20 V功能数量:1
端子数量:5最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:LSSOP封装等效代码:TSOP5/6,.11,37
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
包装方法:TR峰值回流温度(摄氏度):260
功率:NO电源:+-2.25/+-18/4.5/36 V
可编程功率:NO认证状态:Not Qualified
座面最大高度:1.45 mm标称压摆率:20 V/us
子类别:Operational Amplifier最大压摆率:1.2 mA
供电电压上限:20 V表面贴装:YES
技术:BIPOLAR温度等级:AUTOMOTIVE
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:GULL WING
端子节距:0.95 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED标称均一增益带宽:10000 kHz
最小电压增益:100000宽带:NO
宽度:1.6 mmBase Number Matches:1

OPA192IDBVT 数据手册

 浏览型号OPA192IDBVT的Datasheet PDF文件第2页浏览型号OPA192IDBVT的Datasheet PDF文件第3页浏览型号OPA192IDBVT的Datasheet PDF文件第4页浏览型号OPA192IDBVT的Datasheet PDF文件第5页浏览型号OPA192IDBVT的Datasheet PDF文件第6页浏览型号OPA192IDBVT的Datasheet PDF文件第7页 
OPA192  
OPA2192  
OPA4192  
www.ti.com  
SBOS620A DECEMBER 2013REVISED JANUARY 2014  
High Voltage, Rail-to-Rail Input/Output,  
Precision Operational Amplifiers, e-trim Series  
Check for Samples: OPA192, OPA2192, OPA4192  
1
FEATURES  
APPLICATIONS  
High-Resolution ADC Driver Amplifiers  
Multiplexed Data-Acquisition Systems  
SAR ADC Reference Buffers  
Programmable Logic Controllers  
Test and Measurement Equipment  
High-Side and Low-Side Current Sensing  
High Precision Comparator  
23456  
• Low Offset Voltage: ±5 µV  
Low Offset Voltage Drift: ±0.2µV/°C  
Low Noise: 5.5 nV/Hz at 1 kHz  
Wide Bandwidth: 10 MHz GBW (G = 100)  
High Slew Rate : 20 V/µs  
Low Quiescent Current: 1 mA per Amplifier  
Rail-to-Rail Input and Output  
Wide Supply: ±2.25 V to ±18 V, +4.5 V to +36 V  
EMI/RFI Filtered Inputs  
DESCRIPTION  
The OPA192 family  
OPA4192) is a new generation of 36-V, e-trim  
operational amplifiers. These devices offer  
outstanding dc precision and ac performance,  
including rail-to-rail input/output, low offset (±5 µV,  
typ), low offset drift (±0.2 µV/°C, typ), and 10MHz  
bandwidth. Unique features such as differential input-  
voltage range to the supply rail, high output current  
and high capacitive load drive of up to 1 nF, and high  
(1)  
(OPA192, OPA2192, and  
High Common-Mode Rejection: 140 dB  
Low Bias Current: ±5 pA  
Differential Input Voltage Range to Supply Rail  
High Capacitive Load Drive Capability: 1 nF  
Industry standard packages:  
Single in SO-8, MSOP-8 and SOT23-5  
Dual in SO-8 and MSOP-8  
slew rate make the OPA192  
a robust, high-  
performance operational amplifier for high-voltage  
industrial applications. The OPA192 family of op  
amps is available in standard packages and is  
specified from –40°C to +125°C.  
Quad in SO-14 and TSSOP-14  
(1) OPA192 SO-8 package is production data. All other devices  
are product preview.  
OPA192 IN A HIGH-VOLTAGE, MULTIPLEXED, DATA-ACQUISITION SYSTEM  
Analog Inputs  
REF3240  
RC Filter  
OPA192  
RC Filter  
Reference Driver  
Bridge Sensor  
Thermocouple  
Gain Network  
Gain Network  
Gain Network  
OPA192  
+
4:2  
HV MUX  
REF  
+
VINP  
OPA192  
+
Anti-Aliasing  
Filter  
OPA192  
ADS8864  
VIN  
Current Sensing  
M
Photo  
Detect  
LED  
High Voltage Multiplexed Input  
High Voltage Level Translation  
VCM  
Optical Sensor  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
e-trim is a trademark of Texas Instruments.  
TINA-TI is a trademark of Texas Instruments, Inc and DesignSoft, Inc.  
Bluetooth is a registered trademark of Bluetooth SIG, Inc.  
2
3
4
5
6
TINA, DesignSoft are trademarks of DesignSoft, Inc.  
All other trademarks are the property of their respective owners.  
UNLESS OTHERWISE NOTED this document contains  
PRODUCTION DATA information current as of publication date.  
Products conform to specifications per the terms of Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2013–2014, Texas Instruments Incorporated  

OPA192IDBVT 替代型号

型号 品牌 替代类型 描述 数据表
OPA192IDBVR TI

类似代替

High Voltage, Rail-to-Rail Input/Output, Precision Operational Amplifiers, e-trim Series

与OPA192IDBVT相关器件

型号 品牌 获取价格 描述 数据表
OPA192IDGKR TI

获取价格

High Voltage, Rail-to-Rail Input/Output, Precision Operational Amplifiers, e-trim Series
OPA192IDGKT TI

获取价格

High Voltage, Rail-to-Rail Input/Output, Precision Operational Amplifiers, e-trim Series
OPA192IDR TI

获取价格

High Voltage, Rail-to-Rail Input/Output, Precision Operational Amplifiers, e-trim Series
OPA192-Q1 TI

获取价格

汽车类高电压轨到轨输入/输出精密运算放大器 E-Trim™™ 系列
OPA192QDGKRQ1 TI

获取价格

汽车类高电压轨到轨输入/输出精密运算放大器 E-Trim™™ 系列 | DGK | 8 |
OPA196 TI

获取价格

具有多路复用器友好型输入的单路、36V、低功耗通用放大器
OPA196ID TI

获取价格

具有多路复用器友好型输入的单路、36V、低功耗通用放大器 | D | 8 | -40 to
OPA196IDBVR TI

获取价格

具有多路复用器友好型输入的单路、36V、低功耗通用放大器 | DBV | 5 | -40
OPA196IDBVT TI

获取价格

具有多路复用器友好型输入的单路、36V、低功耗通用放大器 | DBV | 5 | -40
OPA196IDGKR TI

获取价格

具有多路复用器友好型输入的单路、36V、低功耗通用放大器 | DGK | 8 | -40