OPA1677, OPA1678, OPA1679
SBOS855D – JANUARY 2017 – REVISED DECEMBER 2021
OPA167x Low-Distortion Audio Operational Amplifiers
The OPA167x amplifiers achieve a low 4.5-nV/√Hz
noise density and low distortion of 0.0001% at 1 kHz,
which improves audio signal fidelity. These devices
also offer rail-to-rail output swing to within 800 mV
with a 2-kΩ load, which increases headroom and
maximizes dynamic range.
1 Features
•
•
•
•
•
Low noise: 4.5 nV/√Hz at 1 kHz
Low distortion: 0.0001% at 1 kHz
High open-loop gain: 114 dB
High common-mode rejection: 110 dB
Low quiescent current:
To accommodate the power-supply constraints of
many types of audio products, the OPA167x operate
over a very-wide supply range of ±2.25 V to ±18 V
(or 4.5 V to 36 V) on only 2 mA of supply current.
These op amps are unity-gain stable and have
excellent dynamic behavior over a wide range of load
conditions, allowing the OPA167x to be used in many
audio circuits.
– 2 mA per channel
•
•
•
•
•
•
Low input bias current: 10 pA (typical)
Slew rate: 9 V/μs
Wide gain bandwidth: 16 MHz (G = 1)
Unity-gain stable
Rail-to-rail output
Wide supply range:
– ±2.25 V to ±18 V, or 4.5 V to 36 V
Single, dual, and quad-channel versions
Available packages:
The OPA167x amplifiers use completely independent
internal circuitry for lowest crosstalk and freedom from
interactions between channels, even when overdriven
or overloaded.
•
•
– Single: SOIC-8 (preview), SOT-23
– Dual: SOIC-8, small SON-8, VSSOP-8
– Quad: Small QFN-16, SO-14, TSSOP-14
Temperature range: –40°C to +85°C
Device Information
PACKAGE(1)
SOIC (8) - Preview
SOT-23 (5)
SOIC (8)
BODY SIZE (NOM)
4.90 mm × 3.91 mm
2.90 mm × 1.60 mm
4.90 mm × 3.91 mm
3.00 mm × 3.00 mm
3.00 mm × 3.00 mm
8.65 mm × 3.91 mm
5.00 mm × 4.40 mm
4.00 mm × 4.00 mm
•
PART NUMBER
OPA1677
2 Applications
•
•
•
Professional microphones and wireless systems
Professional audio mixer/control surface
Guitar amplifier and other music instrument
amplifier
OPA1678
OPA1679
VSSOP (8)
SON (8)
•
•
A/V receiver
Automotive external amplifier
SOIC (14)
TSSOP (14)
QFN (16)
3 Description
The
single-channel
OPA1677,
dual-channel
(1) For all available packages, see the package option
addendum at the end of the data sheet.
OPA1678, and quad-channel OPA1679 (OPA167x)
op amps offer higher system-level performance over
legacy op amps commonly used in audio circuitry.
V+
0.1
0.01
-60
Gain = 10 V/V
Gain = 1 V/V
Gain = -1 V/V
Tail
Current
V
BIAS1
-80
V
V
+
IN
Class AB
V
Control
O
Circuitry
0.001
-100
-120
-140
-
IN
V
BIAS2
0.0001
0.00001
10
100
1k
Frequency (Hz)
10k
V-
C002
Simplified Internal Schematic
THD+N vs Frequency (2-kΩ Load)
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.