High Speed, Low Noise Quad
Operational Amplifier
a
OP471
FEATURES
PIN CONFIGURATIONS
Excellent Speed: 8 V/ꢀs Typ
Low Noise: 11 nV/÷Hz @ 1 kHz Max
Unity-Gain Stable
High Gain Bandwidth: 6.5 MHz Typ
Low Input Offset Voltage: 0.8 mV Max
Low Offset Voltage Drift: 4 ꢀV/ꢁC Max
High Gain: 500 V/mV Min
14-Lead
Hermetic Dip
(Y-Suffix)
14-Lead
Plastic Dip
(P-Suffix)
1
2
3
4
5
6
7
14 OUT D
1
2
3
4
5
6
7
14 OUT D
13 –IN D
12 +IN D
11 V–
OUT A
–IN A
+IN A
V+
OUT A
–IN A
+IN A
V+
13 –IN D
12 +IN D
11 V–
Outstanding CMR: 105 dB Min
Industry Standard Quad Pinouts
OP471
OP471
+IN B
–IN B
OUT B
10 +IN C
+IN B
–IN B
OUT B
10 +IN C
GENERAL DESCRIPTION
9
8
–IN C
9
8
–IN C
The OP471 is a monolithic quad op amp featuring low noise,
11 nV/÷Hz Max @ 1 kHz, excellent speed, 8 V/ms typical, a
gain bandwidth of 6.5 MHz, and unity-gain stability.
OUT C
OUT C
The OP471 has an input offset voltage under 0.8 mV and an
input offset voltage drift below 4 mV/∞C, guaranteed over the full
military temperature range. Open-loop gain of the OP471 is over
500,000 into a 10 kW load ensuring outstanding gain accuracy
and linearity. The input bias current is under 25 nA limiting
errors due to signal source resistance. The OP471’s CMR of
over 105 dB and PSRR of under 5.6 mV/V significantly reduce
errors caused by ground noise and power supply fluctuations.
16-Lead SOIC
(S-Suffix)
1
2
3
4
5
6
7
8
16
15
14
13
12
11
OUT A
–IN A
+IN A
V+
OUT D
–IN D
+IN D
V–
OP471
+IN B
–IN B
OUT B
NC
+IN C
–IN C
The OP471 offers excellent amplifier matching which is important
for applications such as multiple gain blocks, low-noise instru-
mentation amplifiers, quad buffers and low-noise active filters.
10 OUT C
NC
9
The OP471 conforms to the industry standard 14-lead DIP
pinout. It is pin-compatible with the LM148/LM149, HA4741,
RM4156, MC33074, TL084 and TL074 quad op amps and can
be used to upgrade systems using these devices.
NC = NO CONNECT
For applications requiring even lower voltage noise the OP470
with a voltage density of 5 nV/÷Hz Max @ 1 kHz is recommended.
V+
BIAS
OUT
+IN
–IN
V–
Figure 1. Simplified Schematic
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2002