5秒后页面跳转
OP295GSZ-REEL7 PDF预览

OP295GSZ-REEL7

更新时间: 2024-01-08 04:03:15
品牌 Logo 应用领域
亚德诺 - ADI 运算放大器放大器电路光电二极管信息通信管理
页数 文件大小 规格书
16页 397K
描述
Dual/Quad Rail-to-Rail Operational Amplifiers

OP295GSZ-REEL7 技术参数

是否无铅:含铅是否Rohs认证:符合
生命周期:Active零件包装代码:SOIC
包装说明:ROHS COMPLIANT, MS-012AA, SOIC-8针数:8
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.31.00.01风险等级:0.74
Is Samacsys:N放大器类型:OPERATIONAL AMPLIFIER
架构:VOLTAGE-FEEDBACK最大平均偏置电流 (IIB):0.03 µA
25C 时的最大偏置电流 (IIB):0.02 µA最小共模抑制比:86 dB
标称共模抑制比:110 dB频率补偿:YES
最大输入失调电压:800 µVJESD-30 代码:R-PDSO-G8
JESD-609代码:e3长度:4.9 mm
低-失调:YES微功率:YES
湿度敏感等级:1负供电电压上限:-18 V
标称负供电电压 (Vsup):-15 V功能数量:2
端子数量:8最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:SOP封装等效代码:SOP8,.25
封装形状:RECTANGULAR封装形式:SMALL OUTLINE
包装方法:TAPE AND REEL峰值回流温度(摄氏度):260
电源:3/30/+-3/+-15 V认证状态:Not Qualified
座面最大高度:1.75 mm标称压摆率:0.03 V/us
子类别:Operational Amplifier最大压摆率:0.35 mA
供电电压上限:18 V标称供电电压 (Vsup):15 V
表面贴装:YES技术:BICMOS
温度等级:AUTOMOTIVE端子面层:Matte Tin (Sn)
端子形式:GULL WING端子节距:1.27 mm
端子位置:DUAL处于峰值回流温度下的最长时间:30
标称均一增益带宽:85 kHz最小电压增益:500000
宽度:3.9 mmBase Number Matches:1

OP295GSZ-REEL7 数据手册

 浏览型号OP295GSZ-REEL7的Datasheet PDF文件第2页浏览型号OP295GSZ-REEL7的Datasheet PDF文件第3页浏览型号OP295GSZ-REEL7的Datasheet PDF文件第4页浏览型号OP295GSZ-REEL7的Datasheet PDF文件第5页浏览型号OP295GSZ-REEL7的Datasheet PDF文件第6页浏览型号OP295GSZ-REEL7的Datasheet PDF文件第7页 
Dual/Quad Rail-to-Rail  
Operational Amplifiers  
OP295/OP495  
PIN CONFIGURATIONS  
FEATURES  
Rail-to-rail output swing  
Single-supply operation: 3 V to 36 V  
Low offset voltage: 300 μV  
Gain bandwidth product: 75 kHz  
High open-loop gain: 1000 V/mV  
Unity-gain stable  
OUT A  
–IN A  
+IN A  
V–  
1
2
3
4
8
7
6
5
V+  
OP295  
OUT B  
–IN B  
+IN B  
TOP VIEW  
(Not to Scale)  
Figure 1. 8-Lead Narrow-Body SOIC_N  
(S Suffix)  
Low supply current/per amplifier: 150 μA maximum  
OUT A  
–IN A  
+IN A  
V–  
1
2
3
4
8
7
6
5
V+  
OP295  
APPLICATIONS  
Battery-operated instrumentation  
Servo amplifiers  
OUT B  
–IN B  
+IN B  
Actuator drives  
Sensor conditioners  
Power supply control  
Figure 2. 8-Lead PDIP  
(P Suffix)  
OUT A  
–IN A  
+IN A  
V+  
1
2
3
4
5
6
7
14 OUT D  
13 –IN D  
12 +IN D  
11 V–  
GENERAL DESCRIPTION  
Rail-to-rail output swing combined with dc accuracy are the  
key features of the OP495 quad and OP295 dual CBCMOS  
operational amplifiers. By using a bipolar front end, lower noise  
and higher accuracy than those of CMOS designs have been  
achieved. Both input and output ranges include the negative  
supply, providing the user with zero-in/zero-out capability. For  
users of 3.3 V systems such as lithium batteries, the OP295/OP495  
are specified for 3 V operation.  
OP495  
+IN B  
–IN B  
OUT B  
10 +IN C  
9
8
–IN C  
OUT C  
Figure 3. 14-Lead PDIP  
(P Suffix)  
Maximum offset voltage is specified at 300 μV for 5 V operation,  
and the open-loop gain is a minimum of 1000 V/mV. This yields  
performance that can be used to implement high accuracy systems,  
even in single-supply designs.  
OUT A  
–IN A  
+IN A  
V+  
1
2
3
4
5
6
7
8
16 OUT D  
15 –IN D  
14 +IN D  
13 V–  
OP495  
TOP VIEW  
(Not to Scale)  
+IN B  
–IN B  
OUT B  
NC  
12 +IN C  
11 –IN C  
10 OUT C  
The ability to swing rail-to-rail and supply 15 mA to the load  
makes the OP295/OP495 ideal drivers for power transistors and  
H bridges. This allows designs to achieve higher efficiencies and  
to transfer more power to the load than previously possible  
without the use of discrete components.  
9
NC  
NC = NO CONNECT  
Figure 4. 16-Lead SOIC_W  
(S Suffix)  
For applications such as transformers that require driving  
inductive loads, increases in efficiency are also possible.  
Stability while driving capacitive loads is another benefit of this  
design over CMOS rail-to-rail amplifiers. This is useful for  
driving coax cable or large FET transistors. The OP295/OP495  
are stable with loads in excess of 300 pF.  
The OP295 and OP495 are specified over the extended indus-  
trial (−40°C to +125°C) temperature range. The OP295 is  
available in 8-lead PDIP and 8-lead SOIC_N surface-mount  
packages. The OP495 is available in 14-lead PDIP and 16-lead  
SOIC_W surface-mount packages.  
Rev. E  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2006 Analog Devices, Inc. All rights reserved.  
 

OP295GSZ-REEL7 替代型号

型号 品牌 替代类型 描述 数据表
OP295GSZ-REEL ADI

完全替代

Dual/Quad Rail-to-Rail Operational Amplifiers
AD823ARZ ADI

类似代替

Dual, 16 MHz, Rail-to-Rail FET Input Amplifier
OP295GSZ ADI

类似代替

Dual/Quad Rail-to-Rail Operational Amplifiers

与OP295GSZ-REEL7相关器件

型号 品牌 获取价格 描述 数据表
OP296 ADI

获取价格

Micropower, Rail-to-Rail Input and Output Operational Amplifiers
OP296A TTELEC

获取价格

Plastic Infrared Emitting Diode
OP296A

获取价格

Plastic Infrared Emitting Diode
OP296AA TTELEC

获取价格

Plastic Infrared Emitting Diode
OP296AB TTELEC

获取价格

Plastic Infrared Emitting Diode
OP296AC TTELEC

获取价格

Plastic Infrared Emitting Diode
OP296AD TTELEC

获取价格

Plastic Infrared Emitting Diode
OP296B TTELEC

获取价格

Plastic Infrared Emitting Diode
OP296B

获取价格

Plastic Infrared Emitting Diode
OP296C TTELEC

获取价格

Plastic Infrared Emitting Diode