Precision, Low Power, Micropower
Dual Operational Amplifier
a
OP290
FEATURES
PIN CONNECTIONS
Single-/Dual-Supply Operation, 1.6 V to 36 V, ؎0.8 V to ؎18 V
True Single-Supply Operation; Input and Output Voltage
Ranges Include Ground
Low Supply Current (Per Amplifier), 20 A Max
High Output Drive, 5 mA Min
16-Lead SOL
(S-Suffix)
Low Input Offset Voltage, 200 V Max
High Open-Loop Gain, 700 V/mV Min
Outstanding PSRR, 5.6 V/V Max
Industry Standard 8-Lead Dual Pinout
Available in Die Form
1
2
3
4
5
6
7
8
–IN A
16 +IN A
NC
15
+IN A
NC
NC
14
13
12
11
OP290
TOP VIEW
(Not to Scale)
V+
V–
NC
NC
NC
+IN B
–IN B
NC
GENERAL DESCRIPTION
10 OUT B
The OP290 is a high performance micropower dual op amp that
operates from a single supply of 1.6 V to 36 V or from dual
supplies of 0.8 V to 18 V. Input voltage range includes the
negative rail allowing the OP290 to accommodate input signals
down to ground in single-supply operation. The OP290’s out-
put swing also includes ground when operating from a single
supply, enabling “zero-in, zero-out” operation.
NC
9
NC = NO CONNECT
EPOXY MINI-DIP
(P-Suffix)
8-Lead HERMETIC DIP
(Z-Suffix)
The OP290 draws less than 20 µA of quiescent supply current
per amplifier, while able to deliver over 5 mA of output current
to a load. Input offset voltage is below 200 µV eliminating the
need for external nulling. Gain exceeds 700,000 and common-mode
rejection is better than 100 dB. The power supply rejection ratio
of under 5.6 pV/V minimizes offset voltage changes experienced
in battery-powered systems. The low offset voltage and high gain
offered by the OP290 bring precision performance to micropower
applications. The minimal voltage and current requirements
of the OP290 suit it for battery- and solar-powered applications,
such as portable instruments, remote sensors, and satellites. For
a single op amp, see the OP90; for a quad, see the OP490.
V+
OUT A
1
2
3
4
8
7
6
5
A
B
OUT B
–IN B
–IN A
+IN A
V–
+IN B
OP290
V+
+IN
OUTPUT
–IN
NULL
NULL
V
ELECTRONICALLY ADJUSTED ON CHIP
FOR MINIMUM OFFSET VOLTAGE
Figure 1. Simplified Schematic (one of two amplifiers is shown)
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© Analog Devices, Inc., 2002