Dual Low Offset, Low Power
Operational Amplifier
a
OP200
PIN CONNECTIONS
FEATURES
Low Input Offset Voltage: 75 ꢀV Max
Low Offset Voltage Drift, Over –55ꢁC TA +125ꢁC:
0.5 ꢀV/ꢁC Max
Low Supply Current (Per Amplifier): 725 ꢀA Max
High Open-Loop Gain: 5000 V/mV Min
Low Input Bias Current: 2 nA Max
Low Noise Voltage Density: 11 nV/√Hz at 1 kHz
Stable with Large Capacitive Loads: 10 nF Typ
Pin Compatible to OP221, MC1458, and LT1013 with
Improved Performance
16-Lead SOIC (S-Suffix)
<
<
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
–IN A
+IN A
NC
OUT A
NC
–
NC
V–
V+
NC
NC
+IN B
–IN B
NC
NC
–
OUT B
NC
Available in Die Form
NC = NO CONNECT
GENERALDESCRIPTION
The OP200 is the first monolithic dual operational amplifier to
offer OP77 type precision performance. Available in the industry-
standard 8-lead pinout, the OP200 combines precision performance
with the space and cost savings offered by a dual amplifier.
8-Lead PDI
P
(P-Suffix)
8-Lead CERDIP (Z-Suffix)
The OP200 features an extremely low input offset voltage of less
than 75 µV with a drift below 0.5 µV/°C, guaranteed over the full
military temperature range. Open-loop gain of the OP200 exceeds
5,000,000 into a 10 kΩ load; input bias current is under 2 nA;
CMR is over 120 dB and PSRR below 1.8 µV/V. On-chip
Zener zap trimming is used to achieve the extremely low input
offset voltage of the OP200 and eliminates the need for offset
pulling.
V+
1
2
3
4
8
7
6
5
OUT A
–IN A
+IN A
V–
A
OUT B
–IN B
+IN B
–
+
B
+
–
Power consumption of the OP200 is very low, with each amplifier
drawing less than 725 µA of supply current. The total current
drawn by the dual OP200 is less than one-half that of a single
OP07, yet the OP200 offers significant improvements over this
industry-standard op amp. The voltage noise density of the OP200,
11 nV/√Hz at 1 kHz, is half that of most competitive devices.
The OP200 is pin compatible with the OP221, LM158,
MC1458/1558, and LT1013.
The OP200 is an ideal choice for applications requiring multiple
precision op amps and where low power consumption is critical.
For a quad precision op amp, see the OP400.
V+
BIAS
OUT
VOLTAGE
LIMITING
NETWORK
+IN
–IN
V–
Figure 1. Simplified Schematic (One of two amplifiers is shown.)
REV. B
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© 2004 Analog Devices, Inc. All rights reserved.