Z-01H55-B

更新时间： 2024-02-09 23:21:04

品牌	Logo	应用领域
欧姆龙 - OMRON		开关快动开关限位开关光电二极管
页数	文件大小	规格书
28页	5911K
描述
General-purpose Basic Switch

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

Z-01H55-B 技术参数

生命周期：	Active	Reach Compliance Code：	unknown
ECCN代码：	EAR99	HTS代码：	8536.50.70.00
Factory Lead Time：	14 weeks	风险等级：	5.8
执行器行程：	2.33 mm	执行器类型：	PIN PLUNGER
主体宽度：	17.45 mm	主体高度：	25.5 mm
主体长度或直径：	49.2 mm	触点（交流）最大额定R负载：	.1A@125VAC
最大触点电流（交流）：	0.1 A	最大触点电流（直流）：	0.1 A
触点（直流）最大额定R负载：	.1A@30VDC	最大触点电压（交流）：	125 V
最大触点电压（直流）：	30 V	电气寿命：	500000 Cycle(s)
安装特点：	PANEL MOUNT	最大操作力：	3.43 N
最高工作温度：	80 °C	最低工作温度：	-15 °C
最大预行程：	2.2 mm	密封：	IP62
表面贴装：	NO	开关动作：	MOMENTARY
开关功能：	SPDT	开关类型：	SNAP ACTING/LIMIT SWITCH
端接类型：	SCREW	Base Number Matches：	1

Z-01H55-B 数据手册

General-purpose Basic Switch

Best-selling Basic Switch Boasting High

Precision and Wide Variety

• A large switching capacity of 15 A with high repeat accuracy.

• A wide range of variations in contact form for your selection:

basic, split-contact and maintained-contact.

• A series of standard models for micro loads is available.

• A series of molded terminal-type models incorporating

safety terminal protective cover is available.

Model Number Structure

Available types

Basic models

General-purpose

Drip-proof

Without terminal protective cover

With terminal protective cover

Molded terminal

Split-contact models

General-purpose

Maintained-contact models

Basic Models

Split-contact Models

• This type is identical in construction to the general-purpose basic

switch except that it has two pairs of simultaneous acting contacts

by splitting moving contacts.

• Since the moving contacts are connected to a common terminal,

either parallel or series connection is possible.

General-purpose

• A variety of actuators is available for a wide range of application.

• The contact mechanism of models for micro loads is a crossbar

type with gold-alloy contacts, which ensures highly reliable

operations for micro loads.

• Highly reliable micro load switching is ensured if the model is used

as a twin-contact switch.

• Contact Gap:

H2: 0.20 mm (extra-high-sensitivity)

Maintained-contact Models

• The maintained-contact type has a reset button at the bottom of the

switch case, in addition to the pushbutton (plunger) located on the

opposite side of the reset button. Use these buttons alternately.

0.25 mm (high-sensitivity, micro voltage current load)

0.5 mm (standard)

1.8 mm (high-capacity)

1.0 mm (split-contact models)

• Since the Switch has greater pretravel than overtravel, it is suitable

for use in reversible control circuits, manual reset circuits, safety

limit circuits, and other circuits which are not preferable for

automatic resetting. (For further details, refer to individual

datasheets.)

Drip-proof

• These Switches use a rubber boot on the actuator and adhesive fill

between the case and cover to increase resistance to drips.

• Models with drip-proof terminal protective covers and molded

terminals with resin filling are also available.

General-purpose Basic Switch Z

147

12 3 4 5 6 7...28

下载PDF

与Z-01H55-B相关器件

型号	品牌	描述	获取价格	数据表
Z01HB	OMRON	General-purpose Basic Switch	获取价格
Z-01H-B	OMRON	General-purpose Basic Switch	获取价格
Z-01HD	OMRON	General-purpose Basic Switch	获取价格
Z-01HD55	OMRON	General-purpose Basic Switch	获取价格
Z-01HD55-B	OMRON	General-purpose Basic Switch	获取价格
Z-01HDA55	OMRON	Snap Acting/Limit Switch,	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

Z-01H55-B

Z-01H55-B 技术参数

Z-01H55-B 数据手册

与Z-01H55-B相关器件

与Z-01H55-B相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

Z-01H55-B

Z-01H55-B 技术参数

Z-01H55-B 数据手册

与Z-01H55-B相关器件

与Z-01H55-B相关文章

您还可以找

您在本页遇到什么问题？