5秒后页面跳转
OC40E5A-100.000-0.05/0+60 PDF预览

OC40E5A-100.000-0.05/0+60

更新时间: 2024-09-13 15:47:03
品牌 Logo 应用领域
玛居礼 - MERCURY /
页数 文件大小 规格书
2页 152K
描述
Oscillator

OC40E5A-100.000-0.05/0+60 技术参数

生命周期:Contact ManufacturerReach Compliance Code:compliant
风险等级:5.57Base Number Matches:1

OC40E5A-100.000-0.05/0+60 数据手册

 浏览型号OC40E5A-100.000-0.05/0+60的Datasheet PDF文件第2页 
OCXO (Oven Controlled Crystal Oscillators) +5.0 V; +12 V  
OC40E Series 50 ohm Load Sine Wave  
MERCURY  
Since 1973  
Mercury OC40E is 38.8x38.8 mm 4 pin solder sealed metal pacakge  
with 25.4x25.4 mm pin-to-pin spacing high stability low aging OCXO.  
Besides standard AT cut crystal, users can also choose SC cut crystal  
for better performance. HCMOS square wave output is available as OC40T series.  
General Specifications ( 10 MHz at+25°C, at specified Vcc and +2.5 V Vcon)  
Output Wave Form  
Frequency Range  
Sine wave. Wave form code is “E”  
10 MHz ~100.0 MHz  
AT-cut. Use “A” for crystal code or SC-cut: use “S” for crystal code.  
Type of Crystal Cut Used  
SC has better performance but higher cost. See technical note TN-031.  
+5.0 VD.C ±5% (voltage code is “5”); +12.0 V D.C ±5% (voltage code is “12”)  
±0.5 ppm max. at time of shipment; Vcon=+2.5V  
Supply Voltage (Vcc)  
Initial Calibration Tolerance  
Best Stability  
For AT crystal  
For SC crystal  
0°C to +60°C  
±0.05 ppm  
±0.01 ppm  
-20°C to +70°C  
±0.1 ppm  
±0.02 ppm  
-40°C to +85°C  
±0.2 ppm  
±0.03 ppm  
Operating Temperature Range  
(custom spec. on request)  
Aging (after 72 hours of AT:±3 ppb max./day; ±0.5 ppm max./first year;±3 ppm max. over 10 years.  
continuous operation)  
SC: ±2 ppb max./day; ±0.1 ppm max./first year;±0.5 ppm max. over 10 years.  
Supply Voltage ±5% Variation  
±20 ppb max.  
Load ±5% variation  
±20 ppb max.  
AT: 1 minute max. Within ±0.2 ppm of its reference frequency.  
SC: 1 minute max. Within ±0.05 ppm of its reference frequency.  
Warm-up time (at +25°C)  
Freq. Deviation Range  
AT: ±5 ppm min. ±20 ppm max.;  
SC: ±0.5 ppm min, ±2 ppm max.  
Referenced to fo at +25°C and over  
operating temperature range.  
Control Voltage Range  
Transfer Function  
Input Impedance  
2.5 V ± 2.0 V  
Positive: Increasing control voltage increases output frequency.  
100 K ohms min.  
EFC Linearity  
Power Dissipation (at +25°C)  
Output Level  
±10% max.  
Power  
Output  
+5.0 V units: 1.2 Watts max. at steady-state; 3.6 Watts max. at turn-on.  
2 dBm typical with 50load  
Harmonic  
Spurious  
-25 dBc min.  
-75 dBc min.  
Reference Voltage  
Offset  
+4.0 VD.C.±0.3 V D.C. or custom.  
1 Hz  
10 Hz  
100 Hz  
1 KHz  
10 KHz  
Phase  
Noise  
10 MHz AT-cut XTAL  
-75 dBc  
-100 dBc  
-130 dBc  
-140 dBc  
-150 dBc  
10 MHz SC-cut XTAL  
-85 dBc  
-120 dBc  
-140 dBc  
-145 dBc  
-150 dBc  
Storage Temperature  
Shock  
-55°C to +125°C  
2000 G’s, 0.3 ms ½ sine  
10 to 2000 Hz / 10 G’s  
Vibration  
MERCURY  
www.mercury-crystal.com  
Taiwan: TEL (886)-2-2406-2779, FAX (886)-2-2496-0769, e-mail: sales-tw@mercury-crystal.com  
U.S.A.: TEL (1)-909-466-0427, FAX (1)-909-466-0762, e-mail: sales-us@mercury-crystal.com  
MERCURY  
Page 1 of 2  
Date: July 20, 2006  
Rev. 0  

与OC40E5A-100.000-0.05/0+60相关器件

型号 品牌 获取价格 描述 数据表
OC40E5A-100.000-0.2/-40+85 MERCURY

获取价格

Oscillator
OC48 FILTRONIC

获取价格

OC 48 & OC 192 PHASE SHIFTER FOR CLOCK & DATA RECOVERY 6705 K
OC537H12A17-10M PLETRONICS

获取价格

HCMOS Output Clock Oscillator, 10MHz Nom
OC537H12A17-FREQ PLETRONICS

获取价格

HCMOS Output Clock Oscillator, 10MHz Min, 50MHz Max
OC537H12A27-FREQ PLETRONICS

获取价格

HCMOS Output Clock Oscillator, 10MHz Min, 50MHz Max
OC537H12A59-10M PLETRONICS

获取价格

HCMOS Output Clock Oscillator, 10MHz Nom
OC537H12A59-FREQ PLETRONICS

获取价格

HCMOS Output Clock Oscillator, 10MHz Min, 50MHz Max
OC537H12B27-FREQ PLETRONICS

获取价格

HCMOS Output Clock Oscillator, 10MHz Min, 50MHz Max
OC537H12C17-10M PLETRONICS

获取价格

HCMOS Output Clock Oscillator, 10MHz Nom
OC537H12C27-FREQ PLETRONICS

获取价格

HCMOS Output Clock Oscillator, 10MHz Min, 50MHz Max