5秒后页面跳转
捷配首页

Datasheet > OC31E5A-10.000-0.2/-40+85
OC31E5A-10.000-0.2/-40+85 PDF预览

OC31E5A-10.000-0.2/-40+85

更新时间： 2024-11-12 19:56:55
品牌 Logo 应用领域
玛居礼 - MERCURY /
页数 文件大小 规格书
2页 163K
描述
Oscillator

阅读下载

中文翻译

获取价格

OC31E5A-10.000-0.2/-40+85 技术参数

生命周期：Contact ManufacturerReach Compliance Code：compliant
风险等级：5.57Base Number Matches：1

OC31E5A-10.000-0.2/-40+85 数据手册

 浏览型号OC31E5A-10.000-0.2/-40+85的Datasheet PDF文件第2页 
OCXO (Oven Controlled Crystal Oscillators) +5.0 V; +12 V  
OC31E Series 50 ohm Load Sine Wave  
MERCURY  
Since 1973  
Mercury OC31E is 36.2x27.2 mm 5 pin solder sealed metal pacakge  
with 25.4x17.8 mm pin-to-pin spacing high stability low aging OCXO.  
Besides standard AT cut crystal, users can also choose SC cut crystal  
for better performance. HCMOS square wave output is available as OC31T series.  
OC30E series: Same package size as OC31E but with different pin configurations.  
General Specifications ( 10 MHz at+25°C, at specified Vcc and +2.5 V Vcon)  
Output Wave Form  
Frequency Range  
Sine wave. Wave form code is “E”  
10 MHz ~100.0 MHz  
AT-cut. Use “A” for crystal code or SC-cut: use “S” for crystal code.  
Type of Crystal Cut Used  
SC has better performance but higher cost. See technical note TN-031.  
+5.0 VD.C ±5% (voltage code is “5”); +12.0 V D.C ±5% (voltage code is “12”)  
±0.5 ppm max. at time of shipment; Vcon=+2.5V  
Supply Voltage (Vcc)  
Initial Calibration Tolerance  
Best Stability  
For AT crystal  
For SC crystal  
0°C to +60°C  
±0.03 ppm  
±0.01 ppm  
-20°C to +70°C  
±0.08 ppm  
±0.02 ppm  
-40°C to +85°C  
±0.2 ppm  
±0.03 ppm  
Operating Temperature Range  
(custom spec. on request)  
Aging (after 72 hours of AT:±3 ppb max./day; ±0.5 ppm max./first year;±3 ppm max. over 10 years.  
continuous operation)  
SC: ±2 ppb max./day; ±0.1 ppm max./first year;±0.5 ppm max. over 10 years.  
Supply Voltage ±5% Variation  
±20 ppb max.  
Load ±5% variation  
±20 ppb max.  
AT: 3 minutes max. Within ±0.5 ppm of its reference frequency.  
SC: 1 minute max. Within ±0.1 ppm of its reference frequency.  
Warm-up time (at +25°C)  
Freq. Deviation Range  
AT: ±5 ppm min. ±20 ppm max.;  
SC: ±0.5 ppm min, ±2 ppm max.  
Referenced to fo at +25°C and over  
operating temperature range.  
Control Voltage Range  
Transfer Function  
Input Impedance  
2.5 V ± 2.0 V  
Positive: Increasing control voltage increases output frequency.  
100 K ohms min.  
EFC Linearity  
Power Dissipation (at +25°C)  
Output Level  
±10% max.  
Power  
Output  
1.2 Watts max. at steady-state; 3.5 Watts max. at turn-on.  
+3 dBm typical; +8 dBm max. with 50Ω load  
Harmonic  
Spurious  
-30 dBc min.  
-75 dBc min.  
Reference Voltage  
Offset  
+4.0 VD.C.±0.3 V D.C. or custom.  
1 Hz  
10 Hz  
100 Hz  
1 KHz  
10 KHz  
Phase  
Noise  
10 MHz AT-cut XTAL  
-75 dBc  
-100 dBc  
-130 dBc  
-140 dBc  
-150 dBc  
10 MHz SC-cut XTAL  
-85 dBc  
-120 dBc  
-140 dBc  
-145 dBc  
-150 dBc  
Storage Temperature  
Shock  
-55°C to +125°C  
2000 G’s, 0.3 ms ½ sine  
10 to 2000 Hz / 10 G’s  
Vibration  
MERCURY  
www.mercury-crystal.com  
Taiwan: TEL (886)-2-2406-2779, FAX (886)-2-2496-0769, e-mail: sales-tw@mercury-crystal.com  
U.S.A.: TEL (1)-909-466-0427, FAX (1)-909-466-0762, e-mail: sales-us@mercury-crystal.com  
MERCURY  
Page 1 of 2  
Date: July 20, 2006  
Rev. 0  
12

中文翻译

下载PDF

与OC31E5A-10.000-0.2/-40+85相关器件

型号 品牌 获取价格 描述 数据表
OC31E5A-100.000-0.03/0+60 MERCURY

获取价格

 		Oscillator
OC31E5S EUROQUARTZ

获取价格

 		SC-Cut Crystal - Sine Wave - 5.0 Volts
OC31E5S-1.250-0.01/0+60 EUROQUARTZ

获取价格

 		Oscillator,
OC31E5S-1.250-0.02/-20+70 EUROQUARTZ

获取价格

 		Oscillator,
OC31E5S-10.000-0.02/-20+70 MERCURY

获取价格

 		Oscillator
OC31E5S-10.000-0.02-20 EUROQUARTZ

获取价格

 		SC-Cut Crystal - Sine Wave - 5.0 Volts
OC31E5S-10.000-0.03/-40+85 MERCURY

获取价格

 		Oscillator
OC31E5S-100.000-0.01/0+60 EUROQUARTZ

获取价格

 		Oscillator,
OC31E5S-100.000-0.03/-40+85 EUROQUARTZ

获取价格

 		Oscillator,
OC31E5S-FREQ-0.01/-0+60 EUROQUARTZ

获取价格

 		Sine Output Oscillator, 1.25MHz Min, 100MHz Max, METAL PACKAGE-5

与OC31E5A-10.000-0.2/-40+85相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证