5秒后页面跳转
OC30E5S-10.000-0.02/-20+70 PDF预览

OC30E5S-10.000-0.02/-20+70

更新时间: 2023-05-15 00:00:00
品牌 Logo 应用领域
玛居礼 - MERCURY /
页数 文件大小 规格书
2页 161K
描述
Oscillator

OC30E5S-10.000-0.02/-20+70 数据手册

 浏览型号OC30E5S-10.000-0.02/-20+70的Datasheet PDF文件第2页 
OCXO (Oven Controlled Crystal Oscillators) +5.0 V; +12 V  
OC30E Series 50 ohm Load Sine Wave  
MERCURY  
Since 1973  
Mercury OC30E is 36.2x27.2 mm 5 pin solder sealed metal pacakge  
with 25.4x17.8 mm pin-to-pin spacing high stability low aging OCXO.  
Besides standard AT cut crystal, users can also choose SC cut crystal  
for better performance. HCMOS square wave output is available as OC30T series.  
For same package size but with standard Eurocase OCXO pin configurations,  
please refer to OC31E series.  
General Specifications ( 10 MHz at+25°C, at specified Vcc and +2.5 V Vcon)  
Output Wave Form  
Frequency Range  
Sine wave. Wave form code is “E”  
10 MHz ~100.0 MHz  
AT-cut. Use “A” for crystal code or SC-cut: use “S” for crystal code.  
Type of Crystal Cut Used  
SC has better performance but higher cost. See technical note TN-031.  
+5.0 VD.C ±5% (voltage code is “5”); +12.0 V D.C ±5% (voltage code is “12”)  
±0.5 ppm max. at time of shipment; Vcon=+2.5V  
Supply Voltage (Vcc)  
Initial Calibration Tolerance  
Best Stability  
For AT crystal  
For SC crystal  
0°C to +60°C  
±0.03 ppm  
±0.01 ppm  
-20°C to +70°C  
±0.08 ppm  
±0.02 ppm  
-40°C to +85°C  
±0.2 ppm  
±0.03 ppm  
Operating Temperature Range  
(custom spec. on request)  
Aging (after 72 hours of AT:±3 ppb max./day; ±0.5 ppm max./first year;±3 ppm max. over 10 years.  
continuous operation)  
SC: ±2 ppb max./day; ±0.1 ppm max./first year;±0.5 ppm max. over 10 years.  
Supply Voltage ±5% Variation  
±20 ppb max.  
Load ±5% variation  
±20 ppb max.  
AT: 3 minutes max. Within ±0.5 ppm of its reference frequency.  
SC: 1 minute max. Within ±0.1 ppm of its reference frequency.  
Warm-up time (at +25°C)  
Freq. Deviation Range  
AT: ±5 ppm min. ±20 ppm max.;  
SC: ±0.5 ppm min, ±2 ppm max.  
Referenced to fo at +25°C and over  
operating temperature range.  
Control Voltage Range  
Transfer Function  
Input Impedance  
2.5 V ± 2.0 V  
Positive: Increasing control voltage increases output frequency.  
100 K ohms min.  
EFC Linearity  
Power Dissipation (at +25°C)  
Output Level  
±10% max.  
Power  
Output  
1.2 Watts max. at steady-state; 3.5 Watts max. at turn-on.  
+3 dBm typical; +8 dBm max. with 50load  
Harmonic  
Spurious  
-30 dBc min.  
-75 dBc min.  
Reference Voltage  
Offset  
+4.0 VD.C.±0.3 V D.C. or custom.  
1 Hz  
10 Hz  
100 Hz  
1 KHz  
10 KHz  
Phase  
Noise  
10 MHz AT-cut XTAL  
-75 dBc  
-100 dBc  
-130 dBc  
-140 dBc  
-150 dBc  
10 MHz SC-cut XTAL  
-85 dBc  
-120 dBc  
-140 dBc  
-145 dBc  
-150 dBc  
Storage Temperature  
Shock  
-55°C to +125°C  
2000 G’s, 0.3 ms ½ sine  
10 to 2000 Hz / 10 G’s  
Vibration  
MERCURY  
www.mercury-crystal.com  
Taiwan: TEL (886)-2-2406-2779, FAX (886)-2-2496-0769, e-mail: sales-tw@mercury-crystal.com  
U.S.A.: TEL (1)-909-466-0427, FAX (1)-909-466-0762, e-mail: sales-us@mercury-crystal.com  
MERCURY  
Page 1 of 2  
Date: Dec. 1, 2006  
Rev. 1  

与OC30E5S-10.000-0.02/-20+70相关器件

型号 品牌 描述 获取价格 数据表
OC30E5S-10.000-0.02-20 EUROQUARTZ SC-Cut Crystal - Sine Wave - 5.0 Volts

获取价格

OC30E5S-100.000-0.01/0+60 EUROQUARTZ Oscillator,

获取价格

OC30E5S-100.000-0.02/-20+70 EUROQUARTZ Oscillator,

获取价格

OC30E5S-100.000-0.03/-40+85 EUROQUARTZ Oscillator,

获取价格

OC30E5S-FREQ-0.01/-0+60 EUROQUARTZ Sine Output Oscillator, 1.25MHz Min, 100MHz Max, METAL PACKAGE-5

获取价格

OC30E5S-FREQ-0.02/-20+70 EUROQUARTZ Sine Output Oscillator, 1.25MHz Min, 100MHz Max, METAL PACKAGE-5

获取价格