5秒后页面跳转
OC22E5A-20.000-0.2/-40+85 PDF预览

OC22E5A-20.000-0.2/-40+85

更新时间: 2024-01-08 21:33:46
品牌 Logo 应用领域
玛居礼 - MERCURY /
页数 文件大小 规格书
2页 158K
描述
Oscillator

OC22E5A-20.000-0.2/-40+85 技术参数

生命周期:Contact ManufacturerReach Compliance Code:compliant
风险等级:5.57Base Number Matches:1

OC22E5A-20.000-0.2/-40+85 数据手册

 浏览型号OC22E5A-20.000-0.2/-40+85的Datasheet PDF文件第2页 
OCXO (Oven Controlled Crystal Oscillators) +5.0 V; +12 V  
OC22E Series 50 ohm Load Sine Wave  
MERCURY  
Since 1973  
Mercury OC22T is 50.8X50.8 mm 7 pin solder sealed metal pacakge with  
38.1X38.1 mm pin-to-pin spacing high stability low aging OCXO. SC cut  
crystal is standard for OC22 . ±0.4 ppb stability and ±150 ppb total aging  
over 10 years make the OC22 ideal for base stations, digital switching,  
instrumentation and frequency synthesizers. HCMOS output is available as OC22T series.  
General Specifications ( 10 MHz at+25°C, at specified Vcc and +2.5 V Vcon)  
Output Wave Form  
Frequency Range  
Sine wave. Wave form code is “E”  
5.0 MHz ~20.0 MHz  
AT-cut. Use “A” for crystal code or SC-cut: use “S” for crystal code.  
Type of Crystal Cut Used  
SC has better performance but higher cost. See technical note TN-031.  
+5.0 V D.C ±5% (voltage code is “5”); +12.0 VD.C ±5% (voltage code is “12”)  
±0.5 ppm max. at time of shipment; Vcon=+2.5V  
Supply Voltage (Vcc)  
Initial Calibration Tolerance  
Best Stability  
For AT crystal  
For SC crystal  
0°C to +60°C  
±50 ppb  
±0.4 ppb  
-20°C to +70°C  
±0.1 ppm  
±5 ppb  
-40°C to +85°C  
±0.2 ppm  
±15 ppb  
Operating Temperature Range  
(custom spec. on request)  
Aging (after 72 hours of AT:±3 ppb max./day; ±0.5 ppm max./first year;±3 ppm max. over 10 years.  
continuous operation) SC: ±0.5 ppb max./day; ±50 ppb max./first year;±150 ppb max. over 10 years.  
Supply Voltage ±5% Variation  
±1 ppb max.  
Load ±5% variation:  
±1 ppb max.  
AT: 1 minute max. Within ±0.2 ppm of its reference frequency.  
SC: 5 minute max. Within ±10 ppb of its reference frequency.  
Warm-up time (at +25°C)  
Freq. Deviation Range  
AT: ±5 ppm min. ±20 ppm max.;  
SC: ±0.5 ppm min, ±2 ppm max.  
Referenced to fo at +25°C and over  
operating temperature range.  
Control Voltage Range  
Transfer Function  
Input Impedance  
EFC Linearity  
2.5 V ± 2.0 V  
Positive: Increasing control voltage increases output frequency.  
100 K ohms min.  
±20% max.  
Oven Power Dissipation  
Oscillator Power Dissipation  
2 Watts max. at steady-state;6 Watts max. at turn-on. At +25°C.  
0.5 Watts max.  
Power  
Output  
Output Level  
Harmonic  
Spurious  
2 dBm typical with 50load  
-30 dBc min.  
-75 dBc min.  
Reference Voltage  
Offset  
+4.0 V D.C.±0.3 V D.C. or custom.  
1 Hz  
10 Hz  
100 Hz  
1 KHz  
10 KHz  
Phase  
Noise  
10 MHz AT-cut XTAL  
-75 dBc  
-100 dBc  
-130 dBc  
-140 dBc  
-150 dBc  
10 MHz SC-cut XTAL  
-90 dBc  
-120 dBc  
-140 dBc  
-150 dBc  
-150 dBc  
Storage Temperature  
Shock  
-55°C to +125°C  
2000 G’s, 0.3 ms ½ sine  
10 to 2000 Hz / 10 G’s  
Vibration  
MERCURY  
www.mercury-crystal.com  
Taiwan: TEL (886)-2-2406-2779, FAX (886)-2-2496-0769, e-mail: sales-tw@mercury-crystal.com  
U.S.A.: TEL (1)-909-466-0427, FAX (1)-909-466-0762, e-mail: sales-us@mercury-crystal.com  
MERCURY  
Page 1 of 2  
Date: July 20, 2006  
Rev. 0  

与OC22E5A-20.000-0.2/-40+85相关器件

型号 品牌 获取价格 描述 数据表
OC22E5A-5.000-0.05/0+60 MERCURY

获取价格

Oscillator
OC22E5A-5.000-0.1/-20+70 MERCURY

获取价格

Oscillator
OC22E5A-5.000-0.2/-40+85 MERCURY

获取价格

Oscillator
OC22E5A-FREQ-0.05/-0+60 EUROQUARTZ

获取价格

Sine Output Oscillator, 5MHz Min, 20MHz Max, METAL PACKAGE-7
OC22E5A-FREQ-0.2/-40+85 EUROQUARTZ

获取价格

Sine Output Oscillator, 5MHz Min, 20MHz Max, METAL PACKAGE-7
OC22E5S EUROQUARTZ

获取价格

SC-Cut Crystal - Sine Wave - 5.0 Volts
OC22E5S-10.000-0.10-20 EUROQUARTZ

获取价格

SC-Cut Crystal - Sine Wave - 5.0 Volts
OC22E5S-20.000-0.0004/0+60 MERCURY

获取价格

Oscillator
OC22E5S-20.000-0.005/-20+70 MERCURY

获取价格

Oscillator
OC22E5S-20.000-0.015/-40+85 MERCURY

获取价格

Oscillator