Oscillator · VCXO · 3.3 V
SMD Voltage Control Crystal Oscillator · 7.5 x 5.0 mm
RoHS
■ two pinout versions available
■ reflow soldering temperature: 260 °C max.
■ ceramic/metal package
2002/95/EC
actual size
RoHS compliant
Pb free: pins / pads
General Data
Table 1: Frequency Stability Code
type
JV75 3.3 V
stability code
B
50 ppm
O
C
25 ppm
O
frequency range
frequency stability over all*
1.0 ~ 125.0 MHz
25ppm◆/ 50ppm
see table 1
-10 °C ~ +70 °C
-40 °C ~ +85 °C
O
O
standard
O available
current consumption
supply voltage VDC
see table 2
•
3.3 V 10ꢀ
* includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year.
Table 2: Current Consumption max.
Current at 15pF load:
frequency pulling range min.
pulling control voltage
pulling linearity max.
temperature operating
storage
50ppm / 100ppm▲/ 150ppm◗
■
1.65 V 1.65 V
10ꢀ
1.0 ~ 29.9 MHz
30.0 ~ 44.9 MHz
45.0 ~ 51.9 MHz
52.0 ~ 125.0 MHz
15 mA
20 mA
25 mA
35 mA
-10 °C ~ +70 °C / -40 °C ~ +85 °C
-40 °C ~ +85 °C
output
rise & fall time see table 3
Table 3: Rise & Fall Time max.
load max.
15pF
4mA
6.0 ns: 1.0 ~ 39.9 MHz
5.0 ns: 40.0 ~ 125.0 MHz
note:
current max.
- specific data on request
- rise time: 0.1 VDC ~ 0.9 VDC
- fall time: 0.9 VDC ~ 0.1 VDC
low level max. 0.1 x VDC
high level min. 0.9 x VDC
yes
■
standby function
Recommendation
start-up time max.
10ms
To avoid phase noise or FM modulation in the output frequency spectrum,
we recommend to feed the Vcontrol input pin by a low source impedance.
symmetry at 0.5 x VDC
45ꢀ ~ 55ꢀ typ. (40ꢀ ~ 60ꢀ max.)
◆not available > 52.0 MHz ▲ not available > 80.0 MHz ◗ on request, if < 52.0 MHz
Dimensions
standard
optional
0.1
0.1
7.5 max.
2 x 2.54
2 x 2.54
pin connection B pin connection A
# 1: Vcontrol
# 2: e/d
# 1: Vcontrol
# 2: nc
# 6 # 5 # 4
# 3: ground
# 4: output
# 5: nc
# 3: ground
# 4: output
# 5: e/d
# 1 # 2 # 3
top view
0.1
# 1
0.1
1.4
1.8
# 6: VDD
# 6: VDD
in mm
side view
bottom view
pad layout
Order Information
supply voltage
pulling range
in ppm
pin version
option
frequency
in MHz
type
frequency stability
in ppm
O
in Volt
Oscillator
1.0 ~ 125.0 MHz
JV75
C = 25 ppm◆
B = 50 ppm
3.3 = 3.3 V
05 = 50 ppm
10 = 100 ppm▲
15 = 150 ppm◗
B = standard blank = -10 °C ~ + 70 °C
A = optional
T1 = -40 °C ~ + 85 °C
◆not available > 52.0 MHz
not available > 80.0 MHz
◗on request, if < 52.0 MHz
▲
Example: O 20.0-JV75-C-3.3-10-B (LF = RoHS compliant / Pb free pins or pads)
•
Jauch Quartz GmbH e-mail: info@jauch.de
full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com
All specifications are subject to change without notice
260209