PRODUCT DATASHEET
SynJet® LED Cooler R87-46
SynJet cooling technology provides the most reliable thermal
management solution available. This LED cooler has been developed
by Nuventix for cooling downlight and spotlight modules and arrays.
•
•
•
Cools up to 38 W4
Reliable 100K Hours Lifetime
Energy Efficient
•
•
•
5 Yr Warranty
Small Form Factor
Quiet Acoustics
Specifications1
Thermal & Acoustic
SynJet Setting2
TDP4 (W)
Θs-a3
Al
SPL
Wire Connections
ΔT = 30° / 40°C (dBA)5
Red to +VDC
Black & Blue to Ground
Mid Performance
0.84
0.92
1.03
0.79
2.41
36 / 48
33 / 43
29 / 39
38 / 51
12
25
22
Red to +VDC
Black only to Ground
Standard Performance
Silent Performance
PWM at 100% duty cycle
Heatsink Only
Red to +VDC
Black & Purple to Ground
19
Red to +VDC
Black only to Ground
Blue to PWM Signal
27
N/A
N/A
N/A
Electrical
Current (mA)6
Current (mA)6
Voltage
(VDC)
+/- 10%
Voltage
(VDC)
+/- 10%
SynJet Setting2
Pavg
(mW)
750
475
325
800
Pavg
(mW)
800
600
480
980
Imin
Iavg
150
95
Ipeak
300
190
Imin
Iavg
67
50
Ipeak
134
100
80
Mid
Standard
Silent
5
20
12
10
65
130
40
PWM at 100% duty cycle
160
320
82
164
Environmental
All Settings
Min
Max
70
Units Conditions
Operating Temperature
-40
-50
Air temperature surrounding cooler
Air temperature surrounding cooler
Above sea level
°C
°C
m
Storage Temperature
Storage Altitude
75
15K
95
Operating Relative Humidity
Weight
5
%
Non-condensing
335
g
SynJet with Al heat sink
Reliability
100K
hrs
L10 @ 60°C
Regulatory Compliance
RoHS, UL, FCC Part 15 Class B, CE
Mechanical - SynJet Cooling Solution shown with Configurable heat sink
1 All values are typical at 25ºC unless otherwise stated.
2 The Level Select model should be used for discrete performance settings. Follow the instructions in the Product Design Guide for adjusting settings.
3 Thermal resistance values are given as reference only and are measured in free air without airflow obstructions. Thermal resistance is measured from the bottom
middle of the heat sink to ambient air measured at the inlet to the SynJet, with a heat source at least 4.1cm2 using the 60 W reference heat sink. Actual thermal
performance may vary by application and final product design should be tested to assure proper thermal performance.
4 Thermal Design Power is based on a 30ºC or 40ºC temperature rise of heat sink mounting surface above ambient temperature around cooler.
5 Sound Pressure Level is measured at 1 meter distance per ISO 7779.
6 The SynJet has a time varying current. The current waveform is sinusoidal and the average current (Iavg) is used to calculate the average power consumption
(Pavg) at nominal input voltage (VDC). See the Electrical section in the Product Design Guide for a detailed explanation.
4635 Boston Lane
Austin, TX 78735
Phone: 512-382-8100
www.nuventix.com
MKTG-DOC-000152
Revision
A01
Jan 2013 r1