NTE56019 and NTE56020
TRIAC, 25 Amp
Description:
The NTE56019 and NTE56020 are 25 Amp TRIACs with a repetitive peak blocking of 200V and
400V respectively. These devices may be gate triggered from a blocking to conduction state for
either polarity of applied voltage and are designed for AC switching and phase control applications
such as speed and temperature modulation controls, lighting controls, and static switching relays.
The triggering signal is normally applied between the Gate and MT1.
Features:
D Electrically Isolated TO220 Type Package
D Glass–Passivated Junctions
D Surge Capability: Up to 400A
Absolute Maximum Ratings: (TA = +25°C, 60Hz, with a resistive load unless otherwise specified)
Repetitive Peak Blocking Voltage (Note 1), VDRM
NTE56019 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200V
NTE56020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V
RMS On–State Current (Conduction Angle of 360°, TC = –40° to +125°C), IT(RMS) . . . . . . . . . . 25A
Non–Repetitive On–State Current (One Cycle), ITSM
60Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250A
50Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208A
Fusing Current (t = 8.3ms), I2t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259A2s
Peak Gate Current (Pulse Width ≤ 10µs Max), IGM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2A
Peak Gate Dissipation (Pulse Width ≤ 10µs, IGT ≤ IGTM), PGM . . . . . . . . . . . . . . . . . . . . . . . . . . . 20W
Gate Dissipation, PG(AV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW
Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +125°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +125°C
Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5K/W
Thermal Resistance, Junction–to–Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60K/W
Lead Temperature (During Soldering, 1/16” from case, 10sec max), TL . . . . . . . . . . . . . . . . . +230°C
Note 1. For either polarity of MT2 with reference to MT1 terminal.
Electrical Characteristics: (TA = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min
–
Typ Max Unit
Off–State Leakage Current
I
V = V
, T = +25°C, Note 1
–
–
–
0.1
3
mA
mA
V
DRM
D
DRM
J
V = V
, T = +125°C, Note 1
–
D
DRM
J
On–State Voltage
V
TM
I
= 25A, Note 1
–
1.8
T(RMS)
Note 1. For either polarity of MT2 with reference to MT1 terminal.