NTE4900
Surge Clamping, Overvoltage Transient Suppressor,
Unidirectional
Description:
The NTE4900 is a zener overvoltage transient suppressor in an axial lead type package designed
to protect voltage sensitive components from high voltage, high energy transients. This device has
excellent clamping capability, high surge capability, low zener impedance, and fast response time
making the NTE4900 ideal for use in communication systems, numerical controls, process controls,
medical equipment, business machines, power supplies and many other industrial/consumer ap-
plications, to protect CMOS, MOS and Bipolar integrated circuits.
Features:
D Peak Power: 1500W @ 1.0ms
D Maximum Clamp Voltage @ Peak Pulse Current
D Low Leakage: < 5.0µA Above 10V
Absolute Maximum Ratings:
Peak Power Dissipation (Non–Repetitive Current Pulse, TL ≤ +25°C), PPK . . . . . . . . . . . . . . 1500W
Steady State Power Dissipation (TL ≤ +75°C, Lead length = 3/8”), PD . . . . . . . . . . . . . . . . . . . . . 5W
Derate Above TL = +75°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mW/°C
Forward Curent Current (TA = +25°C, Note 1), IFSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200A
Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +175°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +175°C
Lead Temperature (During Soldering, 1/16” from case, 10sec), TL . . . . . . . . . . . . . . . . . . . . . +230°C
Note 1. 1/2 Square Wave (or equivalent), PW = 8.3ms, Duty Cycle = 4 Pulses per minute maximum.
Electrical Characteristics: (TA = +25°C, VF = 3.5V Max, IF(Note 1) = 100A unless otherwise
specified)
Parameter
Breakdown Voltage
Symbol
Test Conditions
IT = 1mA
Min Typ Max Unit
VBR
6
–
–
–
–
–
–
–
–
–
–
–
–
5
V
V
Reverse Stand–Off Voltage
Reverse Leakage Current
Reverse Voltage (Clamping Voltage
Clamping Voltage
VRWM Note 2
IR VRWM = 5V
VRSM IRSM = 120A
300 µA
8.5
7.6
8.0
V
V
V
VC
IPP = 30A
IPP = 60A
Note 1. 1/2 Square Wave (or equivalent), PW = 8.3ms, Duty Cycle = 4 Pulses per minute maximum.
Note 2. A Transient Suppressor is normally selected according to the maximum reverse stand–off
voltage (VRWM), which should be equal to or greater than the DC or continuous peak operat-
ing voltage level.