NTE4044B & NTE4044BT
Integrated Circuit
CMOS, Quad NAND R/S Latch
Description:
The NTE4044B (16−Lead DIP) and NTE4044BT (SOIC−16) are R−S latch devices constructed
with MOS P−Channel and N−Channel enhancement mode devices in a single monolithic structure.
Each latch has an independent Q output and set and reset inputs. The Q outputs are gated through
three−state buffers having a common enable input. The outputs are enabled with a logical “1” or
high on the enable input; a logical “0” or low disconnects the latch from the Q outputs, resulting in
an open circuit at the Q outputs.
Features:
D Double Diode Input Protection
D Three−State Outputs with Common Enable
D Capable of Driving Two Low−Power TTL Loads or One Low−Power Schottky TTL Load Over
the Rated Temperature Range
D Supply Voltage Range: 3Vdc to 18Vdc
Absolute Maximum Ratings: (Voltages referenced to VSS, Note 1)
DC Supply Voltage, VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 to +18.0V
Input Voltage (DC or Transient), Vin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 to VDD to +0.5V
Output Voltage (DC or Transient), Vout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 to VDD to +0.5V
Input Current (DC or Transient, Per Pin), Iin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA
Output Current (DC or Transient, Per Pin), Iout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10mA
Power Dissipation (Per Package), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW
Temperature Derating (from +65° to +125°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −7.0mW/°C
Ambient Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −55° to +125°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65° to +150°C
Lead Temperature (During Soldering, 8sec max), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +260°C
Note 1. Maximum Ratings are those values beyond which damage to the device may occur.