Wound Metalized PPS Film Capacitor Chips
NSMX Series
FEATURES
• WOUND METALLIZED POLYPHENYLENE SULFIDE (PPS) FILM
• WIDE TEMPERATURE RANGE UP TO +125OC (with derating above 105°C)
• COMPATIBLE WITH SAC REFLOW SOLDERING (+260°C)
• VERY STABLE TEMPERATURE, FREQUENCY, VOLTAGE, BIAS AND
nDIELECTRIC ABSORPTION CHARACTERISTICS
NEW
• SUITABLE FOR INVERTOR POWER SUPPLIES FOR LCD BACKLIGHTING
• TAPE AND REEL PACKAGING
Case Size
SPECIFICATIONS
5.7mm x 4.5mm x 2.2mm ~ 10.2mm x 7.2mm x 3.1mm
Capacitance Range
Voltage Ratings
Capacitance Tolerance
Temperature Range
0.01µF ~ 0.22µF
100Vdc (63Vrms up to 40KHz*)
RoHS
Compliant
includes all homogeneous materials
±5% (J), ±10% (K)
-40°C ~ +125°C (voltage derating above +105°C)
0.15% max. @ 1KHz, 0.25% max. @ 100KHz
15GΩ minimum @ 100Vdc, 60 seconds (thru 2K ohm resistor)
150% of Rated Voltage
*See Part Number System for Details
Dissipation Factor (20°C)
Insulation Resistance (20°C)
Dielectric Withstanding Voltage
*Note: Vrms should be limited so that surface temperature rise does not exceed +10°C
ENVIRONMENTAL CHARACTERISTICS
Capacitance Change
Dissipation Factor
Within ±3% of Initial Value
Life Test At +125°C
1,000 Hours at 125% of
Rated Voltage
0.25% max. @ 1KHz, 0.35% max. @ 100KHz
5GΩ minimum @ 100Vdc, 60 seconds
Within ±10% of Initial Value
0.25% max. @ 1KHz, 0.35% max. @ 100KHz
10GΩ minimum @ 100Vdc, 60 seconds
Within ±5% of Initial value
0.35% max. @ 1KHz, 0.45% max. @ 100KHz
5GΩ minimum @ 100Vdc, 60 seconds
Within ±2% of Initial value
0.15% max. @ 1KHz, 0.25% max. @ 100KHz
10GΩ minimum @ 100Vdc, 60 seconds
Insulation Resistance
Capacitance Change
Dissipation Factor
Insulation Resistance
Capacitance Change
Dissipation Factor
Resistance to Soldering Heat
+260°C Peak for 5 Seconds
Humidity Load Life
500 Hours, +40°C @
90~95% RH and Rated Voltage
Insulation Resistance
Capacitance Change
Dissipation Factor
Heat Resistance
125°C for 500 Hours
Insulation Resistance
Solderability with
25% Wt Rosin-Methanol Flux
95% Minimum Coverage After 2~3 Second Dip into 250°C Solder Pot
TEMPERATURE DERATING OF WORKING VOLTAGE
125°C
105°C
100
80
70%
60
40
20
PART NUMBER SYSTEM
NSMX 103 J 100 TR
F
0
-40
RoHS compliant
Tape & Reel
Voltage
20
40
60
140
-20
0
80
100
120
Temperature °C
Tolerance Code: J=±5%, K=±10%
Capacitance in pF, 1st two digits are
significant, 3rd digit is no. of zeros
PERMISSIBLE AC VOLTAGE DERATING
100
Series
80
63Vrms
40
20
30Vrms
0
0
5
10
35 40
50
60 65
75
90
80 85 95 100
15 20 25 30
45
55
70
Frequency (KHz)
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
57