NSiP83086
Signal Isolated RS-485 Transceiver
With Integrated DC to DC Converter
Datasheet (EN) 1.1
RoHS-compliant packages: SOW20 SOW16
Product Overview
NSiP83086 series are high reliability isolated full duplex
RS-485 transceiver with integrated DC to DC converter.
The NSiP83086 isolated DC to DC converter uses on-chip
transformer. The feedback PWM signal is sent to
primary side(Isolator Side1) by a digital isolator based
on Novosense capacity isolation technology. The
NSiP83086 series are safety certified by UL1577
supporting 5kVrms insulation withstand voltage, while
the high integrated solution can help to simplify system
design and improve reliability.
Safety Regulatory Approvals
UL recognition: up to 5000VRMS for 1 minute per UL1577
CQC certification per GB4943.1-2022
CSA component notice 5A
DIN VDE V 0884-11:2017-01
Applications
Industrial automation system
The Bus pins of NSiP83086 are protected from ±8kV
system level ESD to GND2. The device features a fail-safe
circuitry, which guarantees a logic-high receiver output
when the receiver inputs are open or shorted. The
Isolated RS-485 communication
Smart electric meter and water meter
Security and protection monitoring
device have 96k
Ω input impedance that allows up to
Device Information
256 transceivers on the bus.
Part Number
NSiP83086(C)(V)-DSWTR
Package
SOW20
Body Size
12.80mm × 7.50mm
Key Features
Up to 5000Vrms Insulation voltage
ISO-Power integrated isolated DC-to-DC converter
I/O voltage range supports 1.8~5.5V MCU
Power supply voltage:
NSiP83086(V)-DSWR
SOW16
10.30mm x 7.50mm
Note: (C), (V) could be empty representing 5V output version. V represents 3.3V output version, C version has SEL pin
whichcanchoose3.3/5Voutput
VDD: 4.5V to 5.5V for NSiP83086
3V to 5.5V for NSiP83086C and NSiP83086V
VDDL: 1.8V to 5.5V
Functional Block Diagrams
Over current and over temperature protection
High CMTI: ±150kV/us
Data rate: 16Mbps
Up to 256 transceivers on the bus
High system level EMC performance:
BUS Pins w.r.t to GND2 meet IEC61000-4-2
Other Pins w.r.t to GND2 meet IEC61000-4-2
Operation temperature: -40 ~105
±
8kV ESD
NSiP83086(V)-DSWTR
NSiP83086C-DSWTR
NSiP83086(V)-DSWR
±
7kV ESD
Figure 1. NSiP83086 Block Diagrams
℃
℃
Copyright © 2023, NOVOSENSE
Page 1