NSD7310
Brushed DC Motor Driver
Single H-Bridge
Datasheet (EN) 1.4
Product Overview
Key Features
Single H-Bridge Motor Driver
The device NSD7310 is a H-bridge driver for brushed-DC
motor used for applications including printer, robotics, or
other small motor actuators. With two inputs (IN1 & IN2)
and the 4x integrated N-channel MOSFETs, the device can
control external motors bidirectionally with up to 3.6A
peak current. The input can be PWM modulated to control
motor speed using current chopping method. The device
also features sleep mode with low quiescent current when
both IN1 and IN2 inputs are low.
Wide 5-V to 36-V Operating Voltage
Full path (HS + LS) RDS(ON) Typical 520mΩ
3.6-A Peak Current Drive
PWM Control Interface
Integrated Current Chopping Regulation
Low Quiescent Sleep Mode
Small Package and Footprint
The device is integrated with current chopping regulation,
depends on VREF input and the voltage of ISEN pin, which
is proportional to current flowing through motor and an
external sense resistor. The current chopping function
limits the current during motor start-up or stall condition.
8-Pin HSOP8 4.9mm X 3.9mm with exposed PAD
Integrated Fault Protection Features
– VM Undervoltage Protection (UV)
– Overcurrent Protection (OCP)
The device is also fully protected from faults including VM
undervoltage, overcurrent (output short to battery or short
to GND) and overtemperature. When fault condition is
removed, the device automatically resumes normal
operation.
– Over Temperature Shutdown (TSD)
– Fault with Automatically Recovery
Industrial temperature grade (NSD7310)
AEC-Q100 Grade 1 Qualified
Automotive temperature grade (NSD7310-Q1)
Applications
Printers
Functional Block Diagrams
Robotics
Brushed-DC motor actuators
Electrical lock
Other Mechatronic Applications
Device Information
Part Number
Package
Body Size
NSD7310-DHSPR
HSOP8
HSOP8
4.90mm × 3.90mm
NSD7310-Q1HSPR
4.90mm × 3.90mm
Figure 1. NSD7310 Block Diagram
Copyright © 2023, NOVOSENSE
Page 1