NSD1025E
High Speed, 5A Dual-Channel,
Low-Side Gate Driver with Enable Pins
Datasheet (EN) 1.1
Low supply current
Product Overview
Short propagation delays: 50ns (typical)
NSD1025E is a wide supply, non-inverting, dual-channel,
high speed, low side gate driver for both MOSFET, and
IGBT. It has capability to deliver 5A sink and source
current to the capacitive load along with rail-to-rail
output to reduce the Miller effect during MOSFET’s
switching transition. Fast rise and fall times as well as
matched propagation delay of both output channels
enable the NSD1025E suitable for high frequency power
converter application.
Applications
Typical SMPS (Solar, Server, Telecom, Industrial)
Motor Controllers
Pulse Transformer Driver
DC-DC Converters
Class-D switching amplifier
Line-drivers
Both the input and enable pins of NSD1025E has ability
to handle -10V which enhance the noise immunity and
robustness of the device. Driver inputs are compatible
with CMOS and TTL logic hence it provides easy interface
with analog and digital controllers.
The internal circuitry provides an under-voltage lockout
(UVLO) function by holding the output low until the
supply voltage is under the UVLO threshold values. Wide
band of VDD hysteresis between high and low thresholds
offers excellent noise immunity. The NSD1025E device is
available in SOP8, and HMSOP8 package with operating
temperature range from -40°C to 125°C.
Topologies
Synchronous rectifiers
Single and interleaved PFC
LLC
ZVS with pulsed transformer
Device Information(1)
Part Number
Package
Body Size
4.9mm × 3.9mm x 1.75mm
NSD1025E-DSPR
SOP8
NSD1025E-DHMSR HMSOP8
NSD1025E-DDAER DFN8
3.0mm × 3.0mm x 1.1mm
3.0mm × 3.0mm x 0.75mm
Key Features
1) For all available packages, and order information refer to
the end of datasheet.
Wide supply voltage range: 4.5V to 24V
Source/Sink drive current: 5A (Peak)
Two independent enable pins to control channel output
Industry-standard Pin out
Block Diagram
Ability to handle negative swing of (-10V) at each input
pin
Offer High drive current by parallel connection of
outputs
CMOS/TTL compatible logic inputs
5A reverse current feature eliminates the need of output
protection circuitry
Operating temperature range: -40°C to 150°C
RoHS & REACH Compliant
NSD1025E Block Diagram
Copyright © 2023, NOVOSENSE
Page 1