UL CSA
pending pending
LONG LIFE RELAY
FEATURES
NR-RELAYS
• Sealed construction for automatic wave soldering and cleaning
10
.394
20
.787
• Latching types available
• High sensitivity — TTL direct drive possible
• High speed — Up to 500 cycle/sec. operations
10
.394
• Wide switching range and high welding resistance
Gold cobalt (AuCo) contact permits
• Wider switching range from low level up to high current: 10 µA to 1 A
• Higher sticking resistance to inrush current
mm inch
• Stable contact resistance from initial stage throughout life
SPECIFICATIONS
Contact
Characteristics (at 25°C 77°F)
Arrangement
1 Form C
Max. operating speed
500 cps. (mechanical)
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Initial insulation resistance*1
Min. 1000 MΩ at 500 V DC*2
60 mΩ
Between live parts
and ground
1,000 Vrms
350 Vrms (500 V DC)
1,000 Vrms
Initial contact pressure
Contact material
Approx. 5 g .18 oz
Gold cobalt
3 pF
Initial
Between open
breakdown
contact
voltage*3
Sealed type
Contact-
Contact
Between contact
and coil
Magnetically
sealed type
4 pF
4 pF
5 pF
5 pF
6 pF
Operate time*4
(at nominal voltage)
Release time (without diode)*4
(at nominal voltage)
Sealed type
Max. 3 ms (Approx. 1 ms)
Max. 2 ms (Approx. 0.5 ms)
N.O.
contact-coil
Magnetically
sealed type
Electrostatic
capacitance
Sealed type
N.C.
contact-coil
Contact Single side stable
bounce
Approx. 0.5 ms
Approx. 0.3 ms
Magnetically
sealed type
1-coil /2-coil latching
time
1A 20 VDC,
0.3A 110 VAC
Max. 35°C at 0.5 W operating power
Max. 65°C at 1 W operating power
Nominal switching capacity
Temperature rise
Max. switching power
Max. switching voltage
Max. switching current
Min. switching power
Mechanical (at 500 cps.)
33 VA, 20 W
110 V AC, 30 V DC
AC 0.3 A, DC 1 A
Approx. 100 mV 10µA
109
Functional*5
Shock resistance
Min. 980 m/s2 {100 G}
Min. 980 m/s2 {100 G}
98 m/s2 {10 G}, 10 to 55 Hz
at double amplitude of 1.6 mm*8
117.6 m/s2 {12 G}, 10 to 55 Hz
at double amplitude of 2 mm
Destructive*6
Rating
(resistive)
Functional*7
Vibration
resistance
Destructive
1 A 20 V DC/
0.3 A 110 V AC
106 (at 1 cps.)
3×106 (at 2 cps.)
5×106 (at 5 cps.)
107 (at 25 cps.)
5×107 (at 50 cps.)
108 (at 100 cps.)
Conditions for opera- Ambient
–55°C to +65°C*10
–67°F to +149°F
tion, transport and
storage*9 (Not freez-
ing and condensing
at low temperature)
temp.
0.5 A 30 V DC/
0.1 A 110 V AC
Humidity
5 to 85% R.H.
Expected
life (min.
operations)
0.25 A 30 V DC/
0.25 A 30 V AC
Electrical
(resistive)
Unit weight
Approx. 7 g .25 oz
0.2 A 24 V DC/
0.2 A 24 V AC
Remarks
*
*
*
*
*
*
*
*
*
Specifications will vary with foreign standards certification ratings.
0.1 A 12 V DC/
0.1 A 12 V AC
1
2
3
4
5
6
7
8
Measurement at same location as "Initial breakdown voltage" section
Min. 500MΩ at 100 V DC between coils of 2 coil latching type
Detection current: 10mA, Except for between coils of 2 coil latching type
Excluding contact bounce time
Half-wave pulse of sine wave: 6ms; detection time: 10µs
Half-wave pulse of sine wave: 6ms
0.1 A 9 V DC/
0.1 A 9 V AC
Coil (polarized) (at 25°C 77°F)
Detection time: 10µs
Although NR relays are rated at 10 G/55 cps. vibration resistance, they will with-
stand up to 60 G/2,000 cps., provided they receive additional support such as
anchoring to the PC board with epoxy resin.
Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61)
Total temperature (ambient temperature plus temperature rise in coil) should not
exceed 90°C 194°F for single side stable, and 105°C 221°F for latching relays.
See Reference Data for determination of coil voltage versus temperature.
Single side stable
72 to 133 mW
41 to 45 mW
Minimum operting power
Nominal operating power
1 coil latching
2 coil latching
Single side stable
1 coil latching
2 coil latching
9
*
72 to 107 mW
147 to 300 mW
74 to 153 mW
147 to 331 mW
10
*
112
5秒后页面跳转
REF03GPZ资料解读：主要特征、技术参数、应用场景
一文带你了解DS28E40主要特征、安全特性、应用场景
RT9172资料手册解读：关节特性、引脚信息、参数说明
一文带你了解SM8760CA资料：主要参数特征
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
