NLSX4014
4-Bit 100 Mb/s Configurable
Dual-Supply Level
Translator
The NLSX4014 is a 4−bit configurable dual−supply bidirectional
level translator without a direction control pin. The I/O V − and I/O
http://onsemi.com
MARKING
CC
V −ports are designed to track two different power supply rails, V
L
CC
and V respectively. The V supply rail is configurable from 1.3 V
L
CC
DIAGRAMS
to 4.5 V while the V supply rail is configurable from 0.9 V to (V
L
CC
− 0.4) V. This allows lower voltage logic signals on the V side to be
L
UQFN12
MU SUFFIX
CASE 523AE
WAMG
translated into higher voltage logic signals on the V
side, and
CC
G
vice−versa. Both I/O ports are auto−sensing; thus, no direction pin is
required.
The Output Enable (EN) input, when Low, disables both I/O ports
by putting them in 3−state. This significantly reduces the supply
1
WA = Specific Device Code
M
G
= Date Code
= Pb−Free Package
(Note: Microdot may be in either location)
currents from both V and V . The EN signal is designed to track
CC
L
V .
L
14
SOIC−14
D SUFFIX
CASE 751A
Features
NLSX4014G
AWLYWW
14
• Wide High−Side V Operating Range: 1.3 V to 4.5 V
CC
1
Wide Low−Side V Operating Range: 0.9 V to (V − 0.4) V
L
CC
1
• Power Supply Isolation
♦ All Outputs are in the High Impedance State if Either V or V
L
CC
14
is at Ground
NLSX
4014
ALYWG
G
TSSOP−14
DT SUFFIX
CASE 948G
14
• High−Speed with 100 Mb/s Guaranteed Date Rate for V > 1.6 V
• Low Bit−to−Bit Skew
L
1
1
• Overvoltage Tolerant Enable and I/O Pins
• Non−preferential Powerup Sequencing
• Small packaging: 1.7 mm x 2.0 mm UQFN12
• These are Pb−Free Devices
A
L, WL
Y, YY
= Assembly Location
= Wafer Lot
= Year
W, WW = Work Week
G or G
= Pb−Free Package
(Note: Microdot may be in either location)
Typical Applications
• Mobile Phones, PDAs, Other Portable Devices
ORDERING INFORMATION
†
Device
Package
Shipping
NLSX4014MUTAG
NLSX4014DR2G
NLSX4014DTR2G
UQFN12 3000/Tape & Reel
(Pb−Free)
SO−14 2500/Tape & Reel
(Pb−Free)
TSSOP14 2500/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
©
Semiconductor Components Industries, LLC, 2009
1
Publication Order Number:
December, 2009 − Rev. 3
NLSX4014/D