NCV7240, NCV7240A,
NCV7240B
Octal Low-Side
Relay Driver
The NCV7240 is an automotive eight channel low−side driver
providing drive capability up to 600 mA per channel. Output control is
via a SPI port and offers convenient reporting of faults for open load
(or short to ground), over load, and over temperature conditions.
Additionally, parallel control of the outputs is addressable (in pairs)
via the INx pins.
www.onsemi.com
MARKING
DIAGRAM
A dedicated limp−home mode pin (LHI) enables OUT1−OUT4
while disabling OUT5−OUT8.
Each output driver is protected for over load current and includes an
output clamp for inductive loads.
NCV7240x
AWLYWWG
SSOP−24
CASE 565AL
The NCV7240 is available in a SSOP−24 fused lead package.
Features
NCV7240x = Specific Device Code
• 8 Channels
(x = blank, A or B)
= Assembly Location
= Wafer Lot
A
WL
Y
• 600 mA Low−Side Drivers
♦ R
1.5 W (Typ), 3 W (Max)
DS(on)
= Year
• 16−bit SPI Control
WW
G
= Work Week
= Pb−Free Package
♦ Frame Error Detection (8−bit)
♦ Daisy Chain Capable
• Parallel Input Pins for PWM operation
• Power Up Without Open Circuit Detection Active (for LED
applications)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 26 of this data sheet.
• Low Quiescent Current in Sleep and Standby Modes
• Limp Home Functionality
• 3.3 V and 5 V compatible Digital Input Supply Range
• Fault Reporting
♦ Open Load Detection (selectable)
♦ Over Load
♦ Over Temperature
• Power−on Reset (VDD, VDDA)
• SSOP−24 Package (internally fused leads)
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
Applications
• Automotive Body Control Unit
• Automotive Engine Control Unit
• Relay Drive
• LED Drive
• Stepper Motor Driver
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
September, 2016 − Rev. 8
NCV7240/D