NCP5314
Two/Three/Four−Phase
Buck CPU Controller
The NCP5314 provides full−featured and flexible control for the
latest high−performance CPUs. The IC can be programmed as a two−,
three− or four−phase buck controller, and the per−phase switching
frequency can be as high as 1.2 MHz. Combined with external gate
drivers and power components, the controller implements a compact,
http://onsemi.com
MARKING DIAGRAMS
highly integrated multi−phase buck converter.
32
2
Enhanced V
control inherently compensates for variations in
1
both line and load, and achieves current sharing between phases. This
control scheme provides the industry’s fastest transient response,
reducing the need for large banks of output capacitors and higher
switching frequency.
The controller meets VR(M)10.x specifications with all the required
functions and protection features.
NCP5314
AWLYYWW
32 PIN QFN
MN SUFFIX
CASE 485J
(Bottom View)
Features
NCP5314
• Switching Regulator Controller
♦ Programmable 2/3/4 Phase Operation
♦ Lossless Current Sensing
AWLYYWW
LQFP−32
FTB SUFFIX
CASE 873A
32
1
2
♦ Enhanced V Control Method Provides Fast Transient Response
♦ Programmable Up to 1.2 MHz Switching Frequency Per Phase
♦ 0 to 100% Adjustment of Duty Cycle
♦ Programmable Adaptive Voltage Positioning Reduces Output
Capacitor Requirements
A
= Assembly Location
= Wafer Lot
WL
YY
WW
= Year
= Work Week
Text orientation may vary.
♦ Programmable Soft−Start
• Current Sharing
PIN CONNECTIONS
♦ Differential Current Sense Pins for Each Phase
♦ Current Sharing Within 10% Between Phases
• Protection Features
♦ Programmable Pulse−by−Pulse Current Limit for Each Phase
♦ “111110” and “111111” DAC Code Fault
♦ Latching Off Overvoltage Protection
♦ Programmable Latching Overcurrent Protection
♦ Undervoltage Lockout
32 31 30 29 28 27 26 25
24
I
LIM
V
V
V
1
2
3
4
5
6
7
8
ID2
ID3
ID4
23
22
21
20
19
18
17
R
V
OSC
CC
GATE1
PWRLS
♦ External Enable Control
♦ Three−State MOSFET Driver Control through Driver−On Signal
GATE2
GATE3
GATE4
GND
V
FFB
SS
PWRGD
DRVON
• System Power Management
♦ 6−Bit DAC with 0.5% Tolerance Compatible with VR(M)10.x
Specification
9 10 11 12 13 14 15 16
♦ Programmable Lower Power Good Threshold
♦ Power Good Output
ORDERING INFORMATION
†
Device
Package
Shipping
NCP5314MNR2
NCP5314FTR2
2000 Tape & Reel
2000 Tape & Reel
32 Pin QFN
LQFP−32
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Semiconductor Components Industries, LLC, 2004
1
Publication Order Number
September, 2004 − Rev. 9
NCP5314/D