NCP1575
Low Voltage Synchronous
Buck Controller with
Adjustable Switching
Frequency
http://onsemi.com
The NCP1575 is a low voltage buck controller. It provides the
control for a DC−DC power solution producing an output voltage as
low as 0.980 V over a wide current range. It contains all required
MARKING
DIAGRAM
2
circuitry for a synchronous NFET buck regulator using the V t
control method to achieve the fastest possible transient response and
best overall regulation. The NCP1575 operates at a default switching
frequency of 200 kHz, but switching frequency is user−programmable
8
SOIC−8
D SUFFIX
CASE 751
1575
ALYW
8
1
with an additional resistor between R
and ground. This device
OSC
1
provides undervoltage lockout protection, soft−start, and built−in
adaptive nonoverlap and is assembled in an SOIC−8 package.
The NCP1575−based solution requires a bias supply of 12 V, and it
can convert from a bulk power supply ranging from 2 V to 12 V.
Conversion from bulk supplies greater than 7 V is best accomplished
by using an external doubler circuit to raise the enhancement voltage
for the external NFET switches.
A
L
= Assembly Location
= Wafer Lot
Y
W
= Year
= Work Week
Features
PIN CONNECTIONS
• Pb−Free Packages are Available
• 0.980 V ±1.0% Reference Voltage
• V Control Topology
• 200 ns Transient Response
• Programmable Soft−Start
1
8
2
V
GND
CC
R
V
FB
OSC
NC
GATE(L)
GATE(H)
COMP
• 40 ns Gate Rise and Fall Times (3.3 nF Load)
• Adaptive FET Nonoverlap Time
• Default 200 kHz Oscillator Frequency (No External
Resistor Required)
ORDERING INFORMATION
†
• User−Programmable Oscillator Frequency (One External
Resistor Required)
Device
Package
Shipping
NCP1575D
98 Units/Rail
98 Units/Rail
SOIC−8
• Undervoltage Lockout
NCP1575DG
SOIC−8
(Pb−Free)
• On/Off Control Through Use of the COMP Pin
• Overvoltage Protection through Synchronous MOSFETs
• Synchronous N−Channel Buck Design
NCP1575DR2
SOIC−8
2500 Tape & Reel
2500 Tape & Reel
NCP1575DR2G
SOIC−8
(Pb−Free)
• “12 V Only” or Dual Supply Operation
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Semiconductor Components Industries, LLC, 2004
1
Publication Order Number
November, 2004 − Rev. 6
NCP1575/D