Primary Side PWM
Controller for Low Power
Offline SMPS
NCP1362
The NCP1362 offers a new solution targeting output power levels
from a few watts up to 50 W in a universal−mains flyback application.
Thanks to a Novel Method this new controller saves the secondary
feedback circuitry for Constant Voltage and Constant Current
regulation, achieving excellent line and load regulation without
traditional opto coupler and TL431 voltage reference.
The NCP1362 operates in valley lockout quasi−resonant peak
current mode control mode at high load to provide high efficiency.
When the power on the secondary side starts to diminish, the
controller automatically adjusts the duty−cycle then at lower load the
controller enters in pulse frequency modulation at fixed peak current
with a valley switching detection. This technique allows keeping the
output regulation with tiny dummy load. Valley lockout at the first 4
valleys prevent valley jumping operation and then a valley switching
at lower load provides high efficiency.
www.onsemi.com
8
1
SOIC−8
CASE 751AZ
MARKING DIAGRAM
8
P1362yy
ALYW
G
1
Features
• Constant Voltage Primary−Side Regulation < 5%
• Constant Current Primary−Side Regulation < 5%
IC (Pb−Free)
P1362yy = Specific Device Code
(See page 28)
• LFF and BO Feature on a Dedicated Pin:
A
L
Y
W
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
♦ BO Detection
♦ LFF for CC Regulation Improvement
• Quasi−Resonant with Valley Switching Operation
• Optimized Light Load Efficiency and Stand−by Performance
• Maximum Frequency Clamp (No Clamp, 80, 110 and 140 kHz)
• Cycle by Cycle Peak Current Limit
PINOUT DIAGRAM
• Output Voltage Under Voltage and Over Voltage Protection
1
(UVP or OVP)
Vs/ZCD
BO/LFF
VCC
GND
COMP
Fault
CS
• Secondary Diode or Winding Short−Circuit Protection
• Wide Operation V Range (up to 28 V)
CC
DRV
• Low Start−up Current
(Top View)
• CS & V /ZCD Pin Short and Open Protection
S
• Internal Temperature Shutdown
ORDERING INFORMATION
See detailed ordering and shipping information on page 28 of
this data sheet.
• Internal and Fixed Frequency Jittering for Better EMI Signature
• Dual Frozen Peak Current to Both Optimize Light Load Efficiency
(10% Load) and Stand−by Performance (No−load)
• Fault Input for Severe Fault Conditions, NTC Compatible for OTP
• These are Pb−Free Devices
Applications
• Low Power ac−dc Adapters for Routers and Set−Top Box
• Low Power ac−dc Adapters for Chargers
© Semiconductor Components Industries, LLC, 2019
1
Publication Order Number:
July, 2020 − Rev. 2
NCP1362/D