16Mb, Multiple I/O Serial Flash Memory
Features
Micron Serial NOR Flash Memory
1.8V, Multiple I/O, 4KB Sector Erase
N25Q016A11E
• Deep power-down mode: 5µA (TYP)
• Write protection
– Software write protection applicable to every
64KB sector via volatile lock bit
– Hardware write protection: protected area size
defined by five nonvolatile bits (BP0, BP1, BP2,
and TB)
– Additional smart protections, available upon re-
quest
Features
• SPI-compatible serial bus interface
• 108 MHz (MAX) clock frequency
• 1.7–2.0V single supply voltage
• Dual/quad I/O instruction provides increased
throughput up to 432 MB/s
• Supported protocols
– Extended SPI, dual I/O, and quad I/O
• Execute-in-place (XIP) mode for all three protocols
– Configurable via volatile or nonvolatile registers
– Enables memory to work in XIP mode directly af-
ter power-on
• Electronic signature
– JEDEC-standard 2-byte signature (BB15h)
– Two additional extended device ID (EDID) bytes
to identify device factory options
• PROGRAM/ERASE SUSPEND operations
• Continuous read of entire memory via a single com-
mand
– Fast read
– Quad or dual output fast read
– Quad or dual I/O fast read
• Flexible to fit application
– Configurable number of dummy cycles
– Output buffer configurable
– Unique ID code (UID): 14 read-only bytes
• Minimum 100,000 ERASE cycles per sector
• More than 20 years data retention
• Packages JEDEC standard, all RoHS compliant
– F4 = U-PDFN-8/4mm x 3mm (MLP8)
– F6 = V-PDFN-8/6mm x 5mm (MLP8)
– SC = SOP2-8/150 mil (SO8N)
– 51 = XF-SCSP-8/2mm x 2.8mm (XFCSP)
• Software reset
• Hardware RESET function available upon customer
request
• 64-byte, user-lockable, one-time programmable
(OTP) dedicated area
• Erase capability
– Subsector erase 4KB uniform granularity blocks
– Subsector erase 32KB uniform granularity blocks
– Sector erase 64KB uniform granularity blocks
09005aef84a4754f
n25q_16mb_1_8v_65nm.pdf - Rev. H 01/18 EN
Micron Technology, Inc. reserves the right to change products or specifications without notice.
1
© 2012 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.