Datasheet > MX29F400BTC55G

MX29F400BTC55G

更新时间： 2024-02-14 21:29:48

品牌	Logo	应用领域
旺宏电子 - Macronix		可编程只读存储器 ISM频段光电二极管内存集成电路
页数	文件大小	规格书
45页	722K
描述
256KX16 FLASH 5V PROM, 55ns, PDSO48, 12 X 20 MM, PLASTIC, TSOP1-48

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

MX29F400BTC55G 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
零件包装代码：	TSOP1	包装说明：	TSOP1,
针数：	48	Reach Compliance Code：	unknown
风险等级：	5.23	最长访问时间：	55 ns
其他特性：	100,000 MINIMUM ERASE/PROGRAM CYCLES	备用内存宽度：	8
JESD-30 代码：	R-PDSO-G48	JESD-609代码：	e6
长度：	18.4 mm	内存密度：	4194304 bit
内存集成电路类型：	FLASH	内存宽度：	16
湿度敏感等级：	3	功能数量：	1
端子数量：	48	字数：	262144 words
字数代码：	256000	工作模式：	ASYNCHRONOUS
最高工作温度：	70 °C	最低工作温度：
组织：	256KX16	封装主体材料：	PLASTIC/EPOXY
封装代码：	TSOP1	封装形状：	RECTANGULAR
封装形式：	SMALL OUTLINE, THIN PROFILE	并行/串行：	PARALLEL
峰值回流温度（摄氏度）：	260	编程电压：	5 V
认证状态：	Not Qualified	座面最大高度：	1.2 mm
最大供电电压 (Vsup)：	5.5 V	最小供电电压 (Vsup)：	4.5 V
标称供电电压 (Vsup)：	5 V	表面贴装：	YES
技术：	CMOS	温度等级：	COMMERCIAL
端子面层：	TIN BISMUTH	端子形式：	GULL WING
端子节距：	0.5 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	40	宽度：	12 mm
Base Number Matches：	1

MX29F400BTC55G 数据手册

MX29F400T/B

4M-BIT[512Kx8/256Kx16]CMOSFLASHMEMORY

FEATURES

• 524,288 x 8/262,144 x 16 switchable

• Singlepowersupplyoperation

erase cycle completion.

• Ready/Busy pin (RY/BY)

- 5.0V only operation for read, erase and program

operation

-Providesahardwaremethodofdetectingprogramor

erase cycle completion.

• Fast access time: 55/70/90/120ns

• Lowpowerconsumption

- Sector protect/unprotect for 5V only system or 5V/

12V system.

- 40mA maximum active current(5MHz)

- 1uA typical standby current

• Commandregisterarchitecture

- Byte/word Programming (7us/12us typical)

- Sector Erase (Sector structure 16K-Bytex1, 8K-

Bytex2, 32K-Bytex1, and 64K-Byte x7)

• Auto Erase (chip & sector) and Auto Program

-Automaticallyeraseanycombinationofsectorswith

Erase Suspend capability.

• Sectorprotection

- Hardware method to disable any combination of

sectors from program or erase operations

• 100,000minimumerase/programcycles

• Latch-up protected to 100mA from -1V to VCC+1V

• Boot Code Sector Architecture

- T = Top Boot Sector

- B = Bottom Boot Sector

• Low VCC write inhibit is equal to or less than 3.2V

• Package type:

- Automatically program and verify data at specified

address

- 44-pin SOP

• Erasesuspend/EraseResume

- 48-pin TSOP

- Suspends an erase operation to read data from, or

program data to, another sector that is not being

erased, then resumes the erase.

• Compatibility with JEDEC standard

- Pinout and software compatible with single-power

supply Flash

• Status Reply

• 20 years data retention

-Datapolling&Togglebitfordetectionofprogramand

GENERAL DESCRIPTION

The MX29F400T/B is a 4-mega bit Flash memory orga-

nized as 512K bytes of 8 bits or 256K words of 16 bits.

MXIC's Flash memories offer the most cost-effective

and reliable read/write non-volatile random access

memory. The MX29F400T/B is packaged in 44-pin SOP,

48-pin TSOP. It is designed to be reprogrammed and

erased in system or in standard EPROM programmers.

TTL level control inputs and fixed power supply levels

during erase and programming, while maintaining maxi-

mum EPROM compatibility.

MXIC Flash technology reliably stores memory contents

even after 100,000 erase and program cycles. The MXIC

cell is designed to optimize the erase and programming

mechanisms. In addition, the combination of advanced

tunnel oxide processing and low internal electric fields

for erase and program operations produces reliable cy-

cling. The MX29F400T/B uses a 5.0V±10% VCC sup-

ply to perform the High Reliability Erase and auto Pro-

gram/Erase algorithms.

The standard MX29F400T/B offers access time as fast

as 55ns, allowing operation of high-speed microproces-

sors without wait states. To eliminate bus contention,

the MX29F400T/B has separate chip enable (CE) and

output enable (OE) controls.

MXIC's Flash memories augment EPROM functionality

with in-circuit electrical erasure and programming. The

MX29F400T/B uses a command register to manage this

functionality. The command register allows for 100%

The highest degree of latch-up protection is achieved

with MXIC's proprietary non-epi process. Latch-up pro-

tection is proved for stresses up to 100 milliamps on

address and data pin from -1V to VCC + 1V.

P/N:PM0439

REV. 1.9 , APR. 03, 2002

12 3 4 5 6 7...45

下载PDF

与MX29F400BTC55G相关器件

型号	品牌	描述	获取价格	数据表
MX29F400BTC-55G	Macronix	Flash, 256KX16, 55ns, PDSO48, 12 X 20 MM, PLASTIC, MO-142, TSOP1-48	获取价格
MX29F400BTC-70	ETC	EEPROM\|FLASH\|256KX16/512KX8\|CMOS\|TSSOP\|48PIN\|PLASTIC	获取价格
MX29F400BTC70G	Macronix	256KX16 FLASH 5V PROM, 70ns, PDSO48, 12 X 20 MM, PLASTIC, TSOP1-48	获取价格
MX29F400BTC-70G	Macronix	Flash, 256KX16, 70ns, PDSO48, 12 X 20 MM, PLASTIC, MO-142, TSOP1-48	获取价格
MX29F400BTC-90	Macronix	Flash, 256KX16, 90ns, PDSO48, 12 X 20 MM, PLASTIC, MO-142, TSOP1-48	获取价格
MX29F400BTC90G	Macronix	256KX16 FLASH 5V PROM, 90ns, PDSO48, 12 X 20 MM, PLASTIC, TSOP1-48	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

MX29F400BTC55G

MX29F400BTC55G 技术参数

MX29F400BTC55G 数据手册

与MX29F400BTC55G相关器件

与MX29F400BTC55G相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MX29F400BTC55G

MX29F400BTC55G 技术参数

MX29F400BTC55G 数据手册

与MX29F400BTC55G相关器件

与MX29F400BTC55G相关文章

您还可以找

您在本页遇到什么问题？