MVIJL/MVIJP SERIES – Low Jitter 5mm X 7mm PECL/LVPECL VCXO
¾
¾
¾
¾
Hermetically Sealed Ceramic SMD Package
Wide Frequency Range
Available to -55°C to +125°C Operating
Less than 1 pSec Jitter
ELECTRICAL SPECIFICATION:
Frequency Range
Frequency Stability (Inclusive of Temp., Load, Voltage and Aging)
Aging
70.000 MHz to 622.080 MHz
(See Part Number Guide for Options)
±5 ppm / yr max
Operating Temp.Range
Storage Temp. Range
Supply Voltage (Vdd)
Supply Current
Control Voltage
Logic “0”
(See Part Number Guide for Options)
-55°C to +125°C
+3.3 VDC ±5% (LVPECL)
+5.0 VDC ±5% (PECL)
85mA
60mA
+1.65VDC ±1.50VDC
+2.50VDC ±2.00VDC
Vdd – 1.620 VDC max
Vdd- 1.025 vdc min
Logic “1”
Symmetry (50% of waveform)
Load
Rise / Fall Time (20% to 80%)
Start Time
(See Part Number Guide for Options)
50 Ohms into Vdd-2.00 VDC
5nSec max
5mSec max
Jitter (RMS)
Less than 1 pSec
Linearity
±10% max
Pullability
(See Part Number Guide for Options)
MECHANICAL SPECIFICATION:
Humidty
85% RH, 85°C, 48 Hours
Leak Rate 2 X 10-8 ATM-cm3/sec max
MIL-STD-202G, Method 208
Hermetic Seal
Solderability
Reflow Solderability
Vibration
Shock
MIL-STD-883
260°C for 10 seconds
MIL-STD-202G, Method 204 35G, 50 to 2000 Hz
MIL-STD-202G, Method 203 Test Cond E, 1000G’s, ½ Sinewave
Available with Level B Screening
MECHANICAL DIMENSIONS:
7.20 [.283]
MAX
2.00 [.079]
MAX
2.54 [.100]
2.54 [.100]
2.40 [.094]
2.54 [.100]
2.54 [.100]
4.20 [.165]
PIN CONNECTIONS
PIN 1 VOLTAGE CONTROL
PIN 2 ENABLE/DISABLE
PIN 3 GROUND
4
3
5
2
6
1
5.20 [.205]
MAX
PIN 4 OUTPUT
PIN 5 COMPLIMENTARY OUTPUT
PIN 6 SUPPLY VOLTAGE
1.30 [.051]
2.00 [.079]
1.80 [.071]
RECOMMENDED
1.40 [.055]
DIMENSIONS IN BRACKETS ARE IN INCHES
EXTERNAL BYPASS CAPACITOR RECOMMENDED
LAND PATTERN
PART NUMBERING GUIDE:
Frequency
MVIJ
1
5 X 7 Ceramic VCXO
Frequency
Stability
Operating Temperature
Pullability
Symmetry *
Blank = 40/60%
A = 45/55%
020 = ±20 ppm
A = ±200 ppm
C = ±100 ppm
D = ±50 ppm
P = ±25 ppm
Blank = 0°C to +70°C
27 = -20°C to +70°C
48 = -40°C to +85°C
55 = -55°C to +125°C
Supply Voltage
Blank = PECL (+5.0VDC)
3 = LVPECL (+3.3VDC)
Output
P = PECL
L = LVPECL
025 = ±25 ppm
050 = ±50 ppm
100 = ±100 ppm
Jitter
1 = Less than 1 pSec Jitter
B = 47.5/52.5%
*Option B (47.5/52.5%) Available up to 500MHz only
Please Consult with MMD sales department for any other parameters or options.
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688
Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
Sales@mmdcomp.com
Specifications subject to change without notice
Revision 10/6/05 A