‡
Preliminary
MT9M011 - 1/3-Inch Megapixel Image Sensor
Features
1/3-Inch Megapixel CMOS Active-Pixel
Digital Image Sensor
MT9M011
For the latest data sheet revision, please refer to Micron’s Web site: www.micron.com/imaging
Features
Table 1: Key Performance Parameters
•
•
•
•
•
•
•
DigitalClarity ™ CMOS Imaging Technology
High frame rate
Parameter
Optical Format
Typical Value
1/3-inch (5:4)
Superior low-light performance
Low dark current
Simple two-wire serial interface
Auto black level calibration
Operating Modes:
Snapshot and flash control, high frame rate preview,
electronic panning
Active Imager Size
4.6mm(H) x 3.7mm(V),
5.9mm (diagonal)
Active Pixels
Pixel Size
1,280H x 1,024V
3.6µm x 3.6µm
Color Filter Array
Shutter Type
RGB Bayer Pattern
Electronic Rolling Shutter
(ERS)
•
Programmable Controls:
Gain, frame size/rate, exposure, left-right and top-
bottom image reversal, window size, and panning
Maximum Data Rate/
Master Clock
25 MPS/25 MHz
Frame
Rate
SXGA (1280 x
1024)
Programmable up to 15 fps
Applications
•
•
•
•
Cellular phones
PDAs
Toys
VGA (640 x 480)
CIF (352 x 288)
Programmable up to 60 fps
Programmable up to 150 fps
10-bit, on-chip
Other battery-powered products
ADC Resolution
Responsivity
Dynamic Range
SNRMAX
1.0 V/lux-sec (550nm)
>71dB
General Description
The Micron® Imaging MT9M011 is an SXGA-format,
1/3-inch CMOS active-pixel digital image sensor with
an active imaging pixel array of 1,280H x 1,024V. It
incorporates sophisticated camera functions on-chip
such as windowing, column and row skip mode, and
snapshot mode. It is programmable through a simple
two-wire serial interface and has low power consump-
tion.
44dB
I/O Digital
1.7V−3.6V
2.5V−3.1V (2.8V nominal)
2.5V−3.1V (2.8V nominal)
129mW (full resolution
mode)
Supply
Voltage
Core Digital
Analog
Power Consumption
70mW (preview mode)
-30°C to +70°C
The megapixel CMOS image sensor features Digital-
Clarity—Micron’s breakthrough low-noise CMOS
imaging technology that achieves CCD image quality
(based on signal-to-noise ratio and low-light sensitiv-
ity) while maintaining the inherent size, cost, and inte-
gration advantages of CMOS.
Operating Temperature
An on-chip analog-to-digital converter (ADC) provides
10 bits per pixel. FRAME_VALID and LINE_VALID sig-
nals are output on dedicated pins, along with a pixel
clock that is synchronous with valid data. A flash out-
put signal is also available to synchronize external light
sources with sensor exposure time.
The sensor can be operated in its default mode or pro-
grammed by the user for frame size, exposure, gain set-
ting, and other parameters. The default mode outputs
an SXGA image at 13.9 frames per second (fps).
PDF: 09005aef81051c04/Source: 09005aef8102abe8
MT9M011_1.fm - Rev. D 1/05 EN
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2004 Micron Technology, Inc. All rights reserved.
1
‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by Micron without notice. Products are only warranted by Micron
to meet Micron’s production data sheet specifications.