MT90812
Integrated Digital Switch (IDX)
Advance Information
DS5219
ISSUE 2
December 1999
Features
Ordering Information
•
•
•
•
•
192 channel x 192 channel non-blocking
switching
MT90812AP
MT90812AL
68 Pin PLCC
64 Pin MQFP
-40 to +85°C
2 local bus streams @ 2Mb/s supports up to 64
channels
Description
In TDM mode, the expansion bus supports up
to 128 channels at 8.192 Mb/s
Rate conversion capability between local and
expansion bus streams
By integrating key functions needed in voice telecom
application, the Integrated Digital Switch (IDX)
provides a solution-on-a-chip for key telephone
systems, PBX applications or CTI designs. Figure 2
shows a typical configuration.
Integrated conference bridge, supporting 15
parties over 5 bridges
•
•
Integrated PLL
Frequency Shift Keying (FSK) 1200 baud
transmitter, meeting Bell 202 or CCITT V.23
standards
The MT90812 provides non-blocking timeslot
interchange capability for B, C and D channels, up to
a maximum of 192 channels. It offers conference call
capability for 15 parties over a maximum of 5
conference bridges. With its integrated PLL, the
MT90812 provides the necessary clocks to support
•
•
•
•
32 channel dual tone generator, including 16
standard DTMF tones and tone ringer
Expansion bus in IDX Link mode, allows the
interconnection of up to 4 IDX devices
peripheral
devices,
such
as
codecs
or
Programmable per channel gain control from +3
to -27dB, increments of 1dB for output channels
interconnected IDX devices. Integrated into the IDX
is the capability to detect supervisory signalling and
to generate FSK 1200-baud signals. In addition, an
Supervisory signalling cadence detection
capability
integrated
digital
tone
generator
produces
continuous dual tones, including standard DTMF.
•
•
•
HDLC resource allocator
D-channel buffering of message information
With its programmable gain control, the IDX allows
users to use codecs without gain control and also
centrally manage conference calls.
C-channel access for control and status
registers
•
•
Provides both variable and constant delay
modes
To support both small and large switching platforms,
a built-in expansion Bus allows the interconnection of
up to 4 IDX devices or external components such as
Parallel microprocessor port, compatible to Intel
and Motorola and National CPU’s
•
•
Supports both A-law or u-law operation
digital switches. When
4
IDX devices are
Supports both ST-BUS, GCI and HMVIP
framing formats
interconnected, the array is capable of switching 256
channels (64x4), handling 60 conference parties
(15x4) and generating additional tones including
programmable ones. Other functions are also
increased in this configuration. The functional block
diagram is shown in Figure 1.
Applications
•
•
•
Computer Telephony Integration (CTI)
Key Telephone Systems
An evaluation board, MEB90812, is available
complete with software and a user manual, which
demonstrates the layout of a typical application
board and facilitates the use of the MT90812, and
peripheral devices such as Mitel’s DNIC products.
Private Branch Exchange (PBX) Systems
1