RF SILICON AND SUBSYSTEMS SOLUTIONS
FOR BROADBAND COMMUNICATIONS AND AUTOMOTIVE ELECTRONICS
The MicroTuner™ MT2063 is an
APPLICATIONS
advanced, low-power single-chip
tuner, optimized for terrestrial and
cable television reception.
MT2063 SINGLE-CHIP
UNIVERSAL TUNER
•
•
•
•
•
•
Digital terrestrial reception
Analog and digital PC-TV
Digital terrestrial set-top boxes
Portable TV receivers
PRELIMINARY PRODUCT BRIEF
The MT2063 is capable of
receiving frequencies in the 48 MHz
to 1002 MHz range. It can convert a
selected channel to a standard
intermediate frequency (IF)
The MT2063 is a low-power 3.3V single-
chip universal tuner for analog and
digital worldwide terrestrial and cable
standards
TV Plug-in modules
Multi-standard PCTV receivers
FEATURES
between 30 MHz and 60 MHz.
The MT2063 dual-conversion
architecture yields the desirable
characteristics of traditional
•
•
•
•
48 MHz to 1002 MHz input
frequency range
Supports off-air terrestrial and
cable reception
television tuners without the need
for external tracking filters. This is
achieved by an integrated pre-
selection filter at the RF input, low
in-band emissions and outstanding
image rejection
No active external components
required
Standard IF output works
seamlessly with analog and
digital demodulators
The MT2063 has a high level of
integration to keep the total Bill of
Materials (BOM) low. It supports
multiple digital terrestrial television
standards including ATSC, DVB-T,
DMB-T and ISDB-T. In addition,
MT2063 supports 256QAM
•
•
Low-power 1 W dual-conversion
architecture with additional
power saving modes
MT2063 Single-Chip Universal Tuner
Integrated RF pre-filter and first
IF filter
•
•
•
Single-ended RF input
Alignment free
reception as it is used in world wide
digital cable networks and analog
NTSC, PAL and SECAM signals.
It provides excellent in-band
Integrated power detector for
closed loop RF AGC
•
•
Integrated IF variable gain
amplifier for direct connection to
digital demodulators
flatness as well as consistent gain
characteristics across the complete
reception band. The integrated LNA
delivers excellent sensitivity. An
innovative architecture enables an
AGC control range of more than 90
dB. The programmable buffered
reference frequency output enables
crystal sharing with the
Fully compatible with ATSC,
DVB-T, DMB-T, ISDB-T, QAM/
DVB-C, NTSC, PAL, SECAM
and other terrestrial television
standards
•
•
•
Capable of driving cascaded
SAW filters with a built-in fixed
gain IF buffer amplifier
Can drive two IF SAW filters in
parallel for hybrid analog/digital
applications
demodulator.
48 pin, 7 mm x 7 mm QFN
package