5秒后页面跳转
WJFT6-U2AA-C PDF预览

WJFT6-U2AA-C

更新时间: 2023-12-18 00:00:00
品牌 Logo 应用领域
爱模 - MSYSTEM /
页数 文件大小 规格书
6页 194K
描述
Dual Output Plug-in Signal Conditioners W-UNIT

WJFT6-U2AA-C 数据手册

 浏览型号WJFT6-U2AA-C的Datasheet PDF文件第2页浏览型号WJFT6-U2AA-C的Datasheet PDF文件第3页浏览型号WJFT6-U2AA-C的Datasheet PDF文件第4页浏览型号WJFT6-U2AA-C的Datasheet PDF文件第5页浏览型号WJFT6-U2AA-C的Datasheet PDF文件第6页 
MODEL: WJFT  
Dual Output Plug-in Signal Conditioners W-UNIT  
ITEM  
DEFAULT  
0.1  
Sampling cycle: H  
1 (2 for mean aver-  
age output filter)  
No. of samples to be calculated: N  
FILTER/LAG TRANSMITTER  
(field-programmable)  
Time constant: T  
0.0  
200.00  
200.00  
0
Functions & Features  
Max. rate of positive output change (CP)  
Max. rate of negative output change (CN)  
No. of smallest samples to be cut off (L)  
No. of largest samples to be cut off (U)  
• Providing various filter functions which eliminate  
unnecessary elements in the input signals  
• Microprocessor based  
0
• On-site calibration via hand-held programmer PU-2x  
• Field-programmable input range  
• Isolation up to 2000 V AC  
[1] FUNCTION  
1: Moving average output  
2: Dead-time computing  
3: Delay buffer  
• High-density mounting  
Typical Applications  
4: Lead-time computing  
5: Ramp buffer  
• Level control; eliminating drifts in the input signal caused  
by pumps  
6: Mean average output  
50  
(1.97)  
[2] INPUT  
Current  
80  
(3.15)  
A: 4 – 20 mA DC (Input resistance 250 Ω)  
H: 10 – 50 mA DC (Input resistance 100 Ω)  
Voltage  
6: 1 – 5 V DC (Input resistance 1 MΩ min.)  
U1: Range ±100 mV;  
136  
(5.35)  
mm (inch)  
(Minimum span 3 mV, Input resistance 20 kΩ min.)  
U2: Range ±1000 mV;  
(Minimum span 30 mV, Input resistance 20 kΩ min.)  
U3: Range ±10 V;  
MODEL: WJFT[1]–[2][3][4]–[5][6]  
(Minimum span 0.3 V,Input resistance 1 MΩ min.)  
ORDERING INFORMATION  
• Code number: WJFT[1]-[2][3][4]-[5][6]  
Specify a code from below for each of [1] through [6].  
(e.g. WJFT1-6A6-B/Q)  
[3] OUTPUT 1  
Current  
A: 4 – 20 mA DC (Load resistance 600 Ω max.)  
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)  
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)  
D: 0 – 20 mA DC (Load resistance 600 Ω max.)  
E: 0 – 16 mA DC (Load resistance 750 Ω max.)  
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)  
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)  
Z: Specify current (See OUTPUT SPECIFICATIONS)  
Voltage  
• Special input and output ranges (For codes U1, U2, U3, Z  
& 0)  
• Parameters (See "Functions" section)  
Default setting will be used if not otherwise specified.  
Use Ordering Information Sheet (No. ESU-1679) to specify  
parameters.  
• Specify the specification for option code /Q  
(e.g. /C01/S01)  
Note: When the user requires a current and a voltage  
output, specify the current to be the Output 1 which allows  
a greater load.  
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)  
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)  
3: 0 – 1 V DC (Load resistance 1000 Ω min.)  
4: 0 – 10 V DC (Load resistance 10 kΩ min.)  
5: 0 – 5 V DC (Load resistance 5000 Ω min.)  
6: 1 – 5 V DC (Load resistance 5000 Ω min.)  
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)  
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)  
0: Specify voltage (See OUTPUT SPECIFICATIONS)  
WJFT SPECIFICATIONS  
ES-2279 Rev.8 Page 1/6  
http://www.m-system.co.jp/  

与WJFT6-U2AA-C相关器件

型号 品牌 描述 获取价格 数据表
WJFT6-U2AA-C/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT

获取价格

WJFT6-U2AA-R MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT

获取价格

WJFT6-U2AA-R/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT

获取价格

WJFT6-U2AA-V MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT

获取价格

WJFT6-U2AA-V/Q MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT

获取价格

WJFT6-U2AB-B MSYSTEM Dual Output Plug-in Signal Conditioners W-UNIT

获取价格