Web
page
Sample
& buy
Tools &
software
Document 1755-1
High Voltage Power Inductors MSS1514V
Halogen
Free
• 15.5 × 15.5 mm footprint; 13.9 mm high shielded inductors
• High voltage rating of 800 V
• 6 inductance values from 33 µH to 1000 µH
• Low DCR and excellent current handling
Core material Ferrite
AEC
Core and winding loss See www.coilcraft.com/coreloss
Environment RoHS compliant, halogen free
+
Q200 125°C
Terminations RoHS compliant matte tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight: 9.6 – 10.6 g
Operating voltage 800 V max
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 175/13″ reel; Plastic tape: 32 mm wide, 0.5 mm thick,
24 mm pocket spacing, 14.3 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)5
Irms (A)6
Inductance2
(µH)
DCR max3
(Ohms)
SRF typ4
(MHz)
Part number1
10% drop 20% drop 30% drop 20°C rise 40°C rise
MSS1514V-333MED
MSS1514V-473MED
MSS1514V-104KED
MSS1514V-224KED
MSS1514V-474KED
33 20%
47 20%
100 10%
220 10%
470 10%
0.026
0.038
0.064
0.152
0.278
8.6
7.3
5.0
3.0
2.3
5.6
4.7
3.2
2.2
1.5
6.4
5.3
3.7
2.5
1.7
7.2
5.9
4.0
2.7
1.9
3.8
3.0
2.4
1.6
1.2
4.9
3.9
3.1
2.2
1.7
MSS1514V-105KED
1000 10%
0.630
1.5
1.0
1.2
1.3
1.5
1.1
inches
mm
1. Please specify termination code:
Dimensions are in
MSS1514V-105KED
Tolerance: K = 10%, M = 20%
Termination: E = RoHS compliant matte tin over nickel over phos bronze.
Special order:
Q= RoHS tin-silver-copper (95.5/4/0.5) or
P = non-RoHS tin-lead (63/37).
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (175 parts per full reel). Quantities less than full
reel available: in tape (not machine ready) or with
leader and trailer ($25 charge).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B
LCR meter or equivalent.
3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test
fixture.
4. SRF measured using an Agilent/HP 8753D network analyzer and a Coil-
craft SMD-D test fixture.
5. DC current at 25°C that causes the specified inductance drop from its
value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1755-1 Revised 08/10/23
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2023
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.