5秒后页面跳转
MS8104160 PDF预览

MS8104160

更新时间: 2024-09-23 10:46:19
品牌 Logo 应用领域
冲电气 - OKI 先进先出芯片
页数 文件大小 规格书
22页 123K
描述
(262,214-word x 8-Bits) x 2 Dual FIFO

MS8104160 数据手册

 浏览型号MS8104160的Datasheet PDF文件第2页浏览型号MS8104160的Datasheet PDF文件第3页浏览型号MS8104160的Datasheet PDF文件第4页浏览型号MS8104160的Datasheet PDF文件第5页浏览型号MS8104160的Datasheet PDF文件第6页浏览型号MS8104160的Datasheet PDF文件第7页 
FEDS8104160-03  
OKI Semiconductor  
MS8104160  
REVISION3 2000.9.28  
(262,214-word x 8-Bits) x 2 Dual FIFO  
GENERAL DESCRIPTION  
The MS8104160 is a single-chip 4Mb FIFO functionally composed of two OKI 2Mb FIFO  
(First-In First-Out) memories which were designed for 256k x 8-bit high-speed  
asynchronous read/write operation.  
The read clocks and the write clocks of each of the 2Mb FIFO memories are connected in  
common. The MS8104160, functionally compatible with Oki's 2Mb FIFO memory  
(MSM518222A), can be used as a x16 configuration FIFO.  
The MS8104160 is a field memory for wide or low end use in general commodity TVs and  
VTRs exclusively and is not designed for high end use in professional graphics systems,  
which require long term picture storage, data storage, medical use and other storage  
systems.  
The MS8104160 provides independent control clocks to support asynchronous read and  
write operations. Different clock rates are also supported, which allow alternate data rates  
between write and read data streams.  
The MS8104160 provides high speed FIFO (First-in First-out) operation without external  
refreshing: MS8104160 refreshes its DRAM storage cells automatically, so that it appears  
fully static to the users.  
Moreover, fully static type memory cells and decoders for serial access enable the refresh  
free serial access operation, so that serial read and/or write control clock can be halted  
high or low for any duration as long as the power is on. Internal conflicts of memory access  
and refreshing operations are prevented by special arbitration logic.  
The MS8104160’s function is simple, and similar to a digital delay device whose delay-bit-  
length is easily set by reset timing. The delay length and the number of read delay clocks  
between write and read, is determined by externally controlled write and read reset timings.  
Additional SRAM serial registers, or line buffers for the initial access of 256 x 16-bit enable  
high speed first-bit-access with no clock delay just after the write or read reset timings.  
Additionally, the MS8104160 has a write mask function or input enable function (IE), and  
read- data skipping function or output enable function (OE). The differences between write  
enable (WE) and input enable (IE), and between read enable (RE) and output enable (OE)  
are that WE and RE can stop serial write/read address increments, but IE and OE cannot  
stop the increment, when write/read clocking is continuously applied to MS8104160. The  
input enable (IE) function allows the user to write into selected locations of the memory  
only, leaving the rest of the memory contents unchanged.This facilitates data processing to  
display a “picture in picture” on a TV screen.  
1

与MS8104160相关器件

型号 品牌 获取价格 描述 数据表
MS8104160-20TB OKI

获取价格

FIFO, 256KX8, 18ns, Synchronous, CMOS, PQFP100, 14 X 14 MM, 0.50 MM PITCH, PLASTIC, TQFP-1
MS8104160-25TB OKI

获取价格

FIFO, 256KX8, 22ns, Synchronous, CMOS, PQFP100, 14 X 14 MM, 0.50 MM PITCH, PLASTIC, TQFP-1
MS8104160-30TB OKI

获取价格

FIFO, 256KX8, 25ns, Synchronous, CMOS, PQFP100, 14 X 14 MM, 0.50 MM PITCH, PLASTIC, TQFP-1
MS8104160A OKI

获取价格

Dual FIFO (262,214 Words 】 8 Bits) 】 2
MS8104160A-20TB OKI

获取价格

FIFO, 256KX8, 18ns, Synchronous, CMOS, PQFP100, 14 X 14 MM, 0.50 MM PITCH, PLASTIC, TQFP-1
MS8104160A-25TB OKI

获取价格

FIFO, 256KX8, 22ns, Synchronous, CMOS, PQFP100, 14 X 14 MM, 0.50 MM PITCH, PLASTIC, TQFP-1
MS8104160A-XXTB OKI

获取价格

Dual FIFO (262,214 Words 】 8 Bits) 】 2
MS8104160XXTB OKI

获取价格

(262,214-word x 8-Bits) x 2 Dual FIFO
MS8104166 OKI

获取价格

Dual FIFO (262,214 Words × 8 Bits) × 2
MS8104166-20TB OKI

获取价格

FIFO, 256KX8, 18ns, Synchronous, CMOS, PQFP100, 14 X 14 MM, 0.50 MM PITCH, PLASTIC, TQFP-1