POWERINDUCTORS
High-Reliability Power Inductors MS558PTA
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Tin-lead (Sn-Pb) termination for the best possible board
adhesion
■ Excellent current handling; very low DCR
Core material Ferrite
Terminations Tin-lead over tin over nickel over phos bronze.
Weight 1.6 g
Ambient temperature –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 200/7″ reel
Plastic tape: 24 mm wide,0.4 mm thick, 16 mm pocket spacing,
5.45 mm pocket depth
SRF (MHz)4
min typ
119
70.0
Isat (A)5
Irms (A)6
±0°C rise 40°C rise
Inductance2 DCR max3
Part number1
±±0ꢀ (ꢁH)
(mOhm)
10ꢀ drop ±0ꢀ drop 30ꢀ drop
MS558PTA331MSZ
MS558PTA801MSZ
MS558PTA102MSZ
MS558PTA122MSZ
MS558PTA132MSZ
0.33
0.80
1.0
4.0
4.0
4.0
6.0
4.0
170
100
29.5
24.9
16.5
20.5
12.9
30.0
25.2
17.0
21.0
16.8
30.5
25.6
17.5
21.3
17.2
12.5
12.5
12.5
11.0
12.5
16.3
16.3
16.3
15.0
16.3
66.5
63.7
56.7
95.0
91.0
81.0
1.2
1.3
MS558PTA152MSZ
MS558PTA182MSZ
MS558PTA202MSZ
MS558PTA222MSZ
MS558PTA252MSZ
1.5
1.8
2.0
2.2
2.5
6.0
6.0
9.0
4.0
7.5
52.5
49.0
45.5
40.6
38.5
75.0
70.0
65.0
58.0
55.0
13.5
13.3
15.3
8.9
14.0
13.8
15.8
9.6
14.5
14.3
16.2
10.0
12.1
11.0
11.0
8.5
12.5
9.0
15.0
15.0
11.5
16.3
12.0
11.4
11.8
MS558PTA322MSZ
MS558PTA402MSZ
MS558PTA432MSZ
MS558PTA572MSZ
3.2
4.0
4.3
5.7
6.0
9.0
7.5
9.0
37.1
32.9
30.8
24.5
53.0
47.0
44.0
35.0
7.3
8.3
6.4
5.4
7.8
8.5
6.8
5.8
8.5
8.8
7.0
6.0
11.0
8.5
9.0
8.5
15.0
11.5
12.0
11.5
1. When ordering, please specify testing code:
MS558PTA103MSZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer.
5. Typical DC current at which the inductance drops the specified amount from its value without current.
6. Typical current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document MS535-1 Revised 12/05/10
®
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
Fax 847-639-1508
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2012